Deleting Registration Of All Paired Devices; Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics - Sony MEX-BT2850 Operating Instructions Manual

Notes
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
1
Press and hold (SOURCE/OFF) for 1
second to turn off the power.
2
If " " lights, press and hold
(BT) until "
" turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5
Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while "INITIAL" is
flashing.

Other functions

Changing the sound settings

Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
After 5 seconds, the setting is complete and
the display returns to normal reception/play
mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW* , MID* , HI*
1 1 1 (page 24)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB* (Subwoofer volume)
2
Adjusts the subwoofer volume.
AUX* 3 (AUX level)
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" – "0 dB" – "–8
dB."
This setting negates the need to adjust the
volume level between sources.
BTA* 4 (BT-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device: "+18 dB" – "0 dB" –
"–8 dB."
This setting negates the need to adjust the
volume level between sources (page 22).
*1 When EQ3 is activated.
*2 When the audio output is set to "SUB-OUT"
(page 24).
"ATT" is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 25).
*4 When Bluetooth audio source is activated
(page 22).
23