NEC EXPRESS5800 User Manual page 46

(Do not provide setting for any option with "*unavailable." Failure to follow this instruction
may cause the system to operate improperly.)
Run Time - Start Time
Recurrence Pattern
Range of Recurrence
Redundancy Check
Options
Enter the start time. You can set the hour with the left
pull-down menu and the minute in five minutes with the right
pull-down menu.
The display screen varies depending on the Recurrence
Pattern selected in the previous screen.
[daily]
[Every–days] (*unavailable)
•
[weekly]
[Every–weeks] (*unavailable)
•
Check the checkbox of the day of the week on which you
•
want to run redundancy check.
[monthly]
[Day of Month] Set the date on which you want to run
•
redundancy check every month.
[The] (*unavailable)
Check the checkbox of the month in which you want to run
•
redundancy check.
Start from: Start date
End on–No End Date: Select this option.
–End After: (*unavailable)
–Until: (*unavailable)
[Auto Fix] Set the processing to be performed when an
inconsistency error is detected.
If the checkbox is checked, data is repaired from other HDDs
configuring RAID at detection of an inconsistency error.
If the checkbox is not checked, a consistency error is not
repaired at detection of the error.
[Pause on Error] Set whether processing is paused if an
inconsistency error is detected.
If the checkbox is checked, processing is paused at detection
of an inconsistency error.
However, if Auto Fix is also checked, processing is paused
only when the error cannot be repaired.
If the checkbox is not checked, the processing is not paused
in spite of detection of an inconsistency error.
Note: Redundancy check without Auto Fix for a logical drive
not initialized or not subject to redundancy check in the Auto
Fix mode at all cannot be scheduled. If you try, the following
message is registered and the redundancy check is not done.
Failed to create the scheduler: Redundancy Check can not be
scheduled for logical drive x as it is not Fully initialized or
AutoFix is not enable
In this case, schedule the redundancy check in "Auto Fix."
- -
41