Length Of Your Calls - NEC 920 Owner's Manual

PARTIAL LOCK
1) Press FCN + . The display will read:
PWR
E n t E r C d
2) Enter 4-digit lock code. If you key in the correct code, PL
(Partial Lock) will appear on the right side of the display. If
the key is incorrect, the display will go back to the standby
mode.
PWR
o o o o PL
CORRECT
Note: For security the display will not show the 4-digit
lock code.
3) Unlocking is carried out in the same way. Press FCN +
When the lock is cleared the display will go back to the
standby mode. If the key is incorrect, the display will remain
with the PL indicator on the right side of the display.
PWR
o o o o
CORRECT

LENGTH OF YOUR CALLS

The phone allows you to check the duration of your calls.
Upon sending or receiving a call, the current call timer begins
counting. This can be viewed at anytime on the display
by pressing FCN + 2.
PWR
C A L L - t
Minutes
Note: The current call timer will be reset upon receipt or
sending of another call.
PWR
o o o o
INCORRECT
PWR
o o o o PL
INCORRECT
0 1 - 1 6
Seconds
-13-
.