NEC UNIVERGE SV8100 Service Information Bulletin page 37
Bsg technical assistance centre, smb communications server
Hide thumbs
Also See for UNIVERGE SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
5. In this window, uncheck the two available items, then OK.
6. Connect to your SV8100 and download Database.
7. Click Programming > Unregistered Phones > IP Phone List.
8. Check required extensions to be used for IP DECT numbers. For example, extension 180 – 183 will be used.
9. Set MB 15‐05‐18 = Group 1 for required extensions.
10. Upload database changes.
11. Register all IP DECT extensions on DAP Manager and all phones will function.
st
37
52
Document No. SIB 244
Page
of
1
July 2008
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.
The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products
described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.
This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC
Australia Pty Ltd.
Advertisement
Table of Contents
