Install Remote Control Battery; Turn On; Select Country/Region - Philips CEM5100 User Manual

7
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
12 EN
3
Close the battery compartment.
Turn on
To turn the unit on,
• press .
To turn the unit off,
• press and hold
turned off.
Select country/region
Note
•
Select correct country/region for this unit, otherwise
the unit can not work properly.
1
Press to turn the unit on.
» [SELECT OPERATING REGION] is
displayed.
2
Rotate to select an option:
• [USA] (United States)
[LATIN] (Latin America)
•
[EUROPE] (Western Europe)
•
[RUS] (Russia)
•
[M-EAST] (Middle East)
•
• [ASIA] (Asia Pacific)
[JAP] (Japan)
•
• [AUST] (Australia)
3
Press to confirm.
until the unit is