To discourage theft, do not leave the iCN, mounting bracket or any cables in plain view in an unattended vehicle. Failure to adhere to these warnings and cautions may lead to death, serious injury, or property damage. Navman disclaims all liability for installation or use of the iCN that causes or contributes to death, injury, or property damage or that violates any law.
Welcome Thank you for purchasing the Navman iCN. This user manual has been prepared to guide you through the operation of your Navman iCN from first set-up through to continuous use. Please read this manual carefully before using your device for the first time. Keep this manual available for future reference.
2. Setting up your iCN Using your iCN for the first time 1. Position your iCN in your vehicle as shown in your In-Car Installation Guide. Ensure that the GPS Antenna is pulled out to the horizontal position and the Battery Switch is in the On position. 2.
3. Navigation For your safety, enter destination information before you start a journey. Never operate the iCN while driving. Do not leave your iCN attached to your windscreen when not in use as prolonged exposure to heat may damage the device. After you have set up your iCN, the Go To screen will be displayed.
Navigating to an Address Using your iCN, you can navigate to an area, the centre of a street, or a certain intersection. To navigate to an address, select Find Address on the Go To screen. See Address Search Rules on Page 14 for more about searching for addresses. 1.
7. If there is a high number of intersections on your destination street, you will be returned to the Keyboard screen. Enter the first few characters of the cross-street you are seeking and press the right Selection Button. A list screen similar to that of Step 6 will display.
Instruction List Screen The Instruction List screen displays all of the turns of your route, the turn direction, the street name and the distance to the turn. A route must have been calculated for this screen to be able to display. The screen shows three turns at a time. The route can be scrolled through using the up and down buttons on the 4-way toggle.
Page 11
Recent POIs Your iCN automatically stores the types of POI that you visit. If you have recorded a POI as a destination in your iCN, the next time you open the Points of Interest screen, that type of POI is listed. Your iCN will record the last three types of POI you have visited.
4. Preferences You can customise your iCN to suit your needs. To display the Preferences screen, press the right Selection Button when in the Go To screen. Navigation Preferences 1. From the Preferences screen, select Navigation then press OK. 2. Your iCN can avoid certain types of roads or ferries when calculating a route. You can also set your iCN to warn you if a route contains those roads or ferries.
Demonstrations 1. From the Preferences screen, select Demo and press OK. 2. Use the 4-way toggle to highlight Demonstration Enabled and press OK. • Select Route Demonstration if you want your iCN to display a route before you undertake your journey. You can use the 4-way toggle to scroll through the Navigation screens as if you were driving the route.
Insert the memory card that came with your iCN. Your iCN will only operate with a memory card inserted Navman iCN 300 series Memory Card installed. Screen is hard to read Screen not bright enough Change the brightness setting on the Display screen.
Need help?
Do you have a question about the ICN 330 and is the answer not in the manual?
Questions and answers