National Instruments Instrument Driver NI-DMM Quick Reference page 5

Triggers
ICON TYPE
niDMM Configure Trigger
(niDMM_ConfigureTrigger)
Configures the DMM trigger source and trigger delay.
ViSession
ViInt32
ViReal64
niDMM Send Software Trigger
(niDMM_SendSoftwareTrigger)
Sends a command to trigger the DMM.
ViSession
niDMM Configure Trigger Slope
(niDMM_ConfigureTriggerSlope)
Sets the Trigger Slope property to either rising edge or falling edge polarity.
ViSession
ViInt32
niDMM Configure Sample Trigger Slope
(niDMM_ConfigureSampleTriggerSlope)
Sets the Sample Trigger Slope property to either rising edge or falling edge polarity.
ViSession
ViInt32
niDMM Configure Meas Complete Dest
(niDMM_ConfigureMeasCompleteDest)
Specifies the destination of the Measurement Complete (MC) signal.
ViSession
ViInt32
niDMM Configure Meas Complete Slope
(niDMM_ConfigureMeasCompleteSlope)
Sets the MC signal to either rising edge or falling edge polarity.
ViSession
ViInt32
© National Instruments Corporation
PARAMETER VALUE TO SET, COMMENTS
vi Session handle
Trigger Source Default = Immediate
Trigger Delay Default = Auto
vi Session handle
vi Session handle
Trigger Slope
vi Session handle
Slope
vi Session handle
Measurement Default = None
Complete
Destination
vi Session handle
Slope
5 NI-DMM Instrument Driver Quick Reference