Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for National Instruments 2 SD Card Memory Module NI 9802
Summary of Contents for National Instruments 2 SD Card Memory Module NI 9802
- Page 1 OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9802 2 SD Card Memory Module...
- Page 2 The National Instruments 9802 is an SD Card storage module that can read from and write to SD Cards. The NI 9802 is supported only in CompactRIO Note active chassis, such as the cRIO-910x. This document describes how to use the NI 9802 and includes specifications for the NI 9802.
-
Page 3: Safety Guidelines For Hazardous Locations
Do not remove modules unless power has been Caution switched off or the area is known to be nonhazardous. © National Instruments Corp. This icon denotes that the component may be NI 9802 Operating Instructions and Specifications... - Page 4 Substitution of components may impair Caution suitability for Class I, Division 2. For Zone 2 applications, install the system Caution in an enclosure rated to at least IP 54 as defined by IEC 60529 and EN 60529. Special Conditions for Hazardous Locations Use in Europe This equipment has been evaluated as Ex nA IIC T4 equipment under DEMKO Certificate No.
-
Page 5: Inserting And Removing Sd Cards
The NI 9802 has four LEDs that indicate which slots contain an SD Card and if the SD Card is active. Refer to Figure 1 for the designation of SD Card slots and LEDs. Refer to Table 1 for © National Instruments Corp. NI 9802 Operating Instructions and Specifications... - Page 6 descriptions of each of the LEDs on the NI 9802 and when it is safe to remove SD Cards from the NI 9802. 1 Present (Card 0) 2 Busy (Card 0) 3 Present (Card 1) Figure 1. NI 9802 Card Slots and LEDs NI 9802 Operating Instructions and Specifications 4 Busy (Card 1) 5 Card Slot Doors...
- Page 7 Green Busy (Card 1), SD Card Slot 1 This LED is lit when the card in Yellow © National Instruments Corp. Table 1. LED Descriptions in Slot 0 and the SD Card slot door is closed. Slot 0 is active. This LED is...
-
Page 8: Sleep Mode
SD Card Slot Doors Do not open an SD Card slot door or remove an SD Card while the yellow LED for that card is lit or flashing. If you open an SD Card slot door while the yellow LED for that card is lit or flashing, the NI 9802 software acts to protect the file system of the SD Card. -
Page 9: Specifications
The following specifications are typical for the range –40 to 70 °C unless otherwise noted. Certification standards for some specifications vary based on the system in which you use the module. © National Instruments Corp. NI 9802 Operating Instructions and Specifications... -
Page 10: Power Requirements
Data Storage Characteristics Number of SD Cards ... 2 Storage ... 2 GB max storage for each Data transfer... 2 MB/s read/write for one MTBF ... 2,106,312 hours at 25 °C; Contact NI for Bellcore MTBF specifications Note at other temperatures or for MIL-HDBK-217F specifications. -
Page 11: Physical Characteristics
For UL and other safety certifications, refer to the Note product label or visit for the model number or product line, and click the appropriate link in the Certification column. © National Instruments Corp. SD Cards ni.com/certification NI 9802 Operating Instructions and Specifications , search... - Page 12 Europe (DEMKO)... Ex nA IIC T4 Environmental National Instruments C Series modules are intended for indoor use only but may be used outdoors if installed in a suitable enclosure. Refer to the installation instructions for the chassis you are using for more information about meeting these specifications.
-
Page 13: Shock And Vibration
Sinusoidal (IEC 60068-2-6) ... 5 g, 10 to 500 Hz Operating shock (IEC 60068-2-27)... 30 g, 11 ms half sine, When two SD Cards are inserted and both SD Card slot doors are closed. © National Instruments Corp. noncondensing noncondensing , 10 to 500 Hz... -
Page 14: Electromagnetic Compatibility
Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use: • EN 61326 EMC requirements; Industrial Immunity • EN 55011 Emissions; Group 1, Class A •... -
Page 15: Waste Electrical And Electronic Equipment (Weee)
WEEE recycling centers and National Instruments WEEE initiatives, visit environment/weee.htm Where to Go for Support The National Instruments Web site is your complete resource for technical support. At everything from troubleshooting and application development self-help resources to email and phone assistance from NI Application Engineers. -
Page 16: Branch Office
Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545 National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Need help?
Do you have a question about the 2 SD Card Memory Module NI 9802 and is the answer not in the manual?
Questions and answers