Battery Replacement; To Replace The Batteries - Tripp Lite SMART1500LCDT Owner's Manual

Battery Replacement

Under normal conditions, the original battery in your UPS will last several years. Battery replacement should only be performed by
qualified personnel. Refer to "Battery Warnings" in the Safety section for complete battery safety information.
Your UPS requires two Tripp Lite RBC51 replacement battery cartridges. For further information about replacement compatibility and
ordering, visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm.

To Replace the Batteries:

1. Remove screw at the bottom of the unit's front panel.
3. Remove the battery support bar.
5. Connect the new batteries in exactly the same manner as
the old ones: positive (red) connectors together and negative
(black) connectors together. Carefully push the batteries back
into the UPS.
12-12-069-93-327C.indb 9
2. Carefully pull the front panel away from the UPS.
4. Carefully pull the old batteries from the UPS and disconnect them.
6. Reinstall the battery support bar and replace the front panel.
9
12/6/2012 9:28:42 AM