Yowza Osprey User Manual page 36

36 YOWZA OSPREY TREADMILL
COMPUTER OPERATION
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key and attach
the clip to your clothing at your waist before beginning your workout. If you should encounter problems and need to stop the motor
quickly, simply pull on the cord to disengage the safety key from the console. To continue operation first turn the power switch to off
and set the speed controller to stop. Next turn the power switch to on and reinsert the safety key into the console.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. The UPPER LCD and LOWER LCD
screens light up all digits and enter the POWER ON mode.
SLEEP MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 3 minutes without receiving any input.
Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
DISPLAY MODE
This feature is designed only for store display purpose. To cancel the SLEEP MODE feature, pull out the safety key, press and hold
the Incline UP and DOWN buttons, insert the safety key to power on the treadmill. Press Incline up/down to select on or off , and
press ENTER to confirm . After one short beep sound, the SLEEP MODE will be cancelled and the LCD will not go off as long as the
power switch stays on and the safety key is inserted properly.
ENGLISH / METRIC CONVERSION
The computer has been preset to calculate and show all information in English (miles, pounds, inches). The computer can be set to
display information in Metric (kilometers, kilograms, centimeters). To do this set the POWER SWITCH, located on the base frame, to
ON. Press and hold the START button. Insert the SAFETY KEY and pull up. The computer will sound one short BEEP and the LCD
will show KM and blink. Press the START button to switch between KM and ML. KM means Metric and ML means English. Press the
STOP/ENTER button to confirm the setting and return to POWER ON status after one long beep sound.
QUICK START
When the treadmill is in POWER ON status, press the START button to activate the QUICK START. The SPEED LCD counts down 3
seconds with 3 short beeps then starts from 0.5 MPH/0.8 KPH. Press the SPEED UP/DOWN buttons to adjust the speed. Press the
INCLINE UP/DOWN buttons to elevate the treadmill. The TIME, CALORIES and DISTANCE count up from 0. The PULSE LCD show
P until you hold the hand pulse grip sensors then the PULSE LCD will display the current pulse during the workout.
STOP/PAUSE
During the workout, press the STOP/ENTER button to PAUSE the treadmill, all workout data will be frozen. Press the START button
to resume the workout and all data will continue counting. If the STOP/ENTER button is pressed twice, the treadmill will return to
POWER ON status and all workout information will return to 0.
COMPUTER PROGRAM OPERATION
To select the program, press the program buttons when the treadmill is in POWER ON status. For the first time user, you have to set
up the user information and assign your USER ID from U 1 to U 9 before the program starts.