Table of Contents
Advertisement
Power Control
MENU m →
System
→
Power Control
Power Control
Auto Power On
Max. Power Saving
Standby Control
Power Button
Network Standby
- The displayed image may differ depending on the model.
→ ENTER E
Off
On
Auto
Power on only
Off
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Off
On
•
/
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
Off
On
/
•
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
No Signal
The message
will appear if no source device is connected.
Off
•
No Signal
The message
will appear if no input signals are detected.
― If
No Signal
is displayed although a source device is connected, check the cable connection.
― If
No Signal Message
is set to Off, the
No Signal Message
If this is the case, set
On
•
Power-saving mode will activate if no input signals are detected.
No Signal
message does not appear.
to On.
Advertisement
Table of Contents
