Philips BDL5545E Service Manual page 35

7). If you want to set up more schedule items, press the EXIT button and then repeat the steps above.
A check mark in the box next to the number of the schedule item indicates that the selected schedule
is in effect.
Notes:
The selection of Every day within a schedule item takes priority over other schedules that are set
up to operate weekly.
When schedule items overlap, scheduled power on time has priority over scheduled power off
time.
If there are two schedule items programmed for the same time, then the highest numbered
schedule has priority.
Monitor ID
Set the ID number for controlling the displayvia the RS232C connection. Each displaymust have an
unique ID number when multiple BDL5545E displaysare connected.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to select
a monitor ID.
DDC/CI
Choose to turn On or Off the DDC/CI communication function. Select On for normal use.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
HDMI with One Wire
This function gives you the ability to control your display through the HDMI connector using
CEC(Consumer Electronics Control) commands.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
Smart power
Set the displayto reduce the power consumption automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Off
Auto signal detection
Choose to let the displaydetect and display available signal sources automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN to make selection.
ON - Set the displayto select the image automatically once a signal is connected.
OFF - Once a signal is connected, it can only be selected manually.
Advanced option reset
Reset all settings in the Advanced option menu.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make
selection. Select Reset and press the SET button to restore settings to factory preset values. Press
the EXIT button or select Cancel and press the SET button to cancel and then return to the previous
menu.
Medium High
Philips BDL5545E 34