Troubleshooting; Internet Radio - Teac NT-503 Network Manual

Settings (continued)
Inputting characters
Follow the procedures below to input characters for a PROXY server
address .
1
When the input screen is open, press the INPUT
SELECTOR knob.
*PROXY URL
>_
The character to the right of the
o You can also press the ENTER button on the remote control .
2
Turn the INPUT SELECTOR knob to select a charac-
ter, and press the INPUT SELECTOR knob to input
that character.
*PROXY URL
>
Turn the INPUT SELECTOR knob to show the icons below, fol-
lowed by ASCII characters in character code order .
: Enter
Confirm an input character
: Insert
Insert a character at the cursor position
: Delete
Delete the character to the left of the cursor
: Back
Move the cursor one character to the left
: Forward
Move the cursor one character to the right
3
When done inputting characters, select the
icon and the press the INPUT SELECTOR knob to
confirm.
18
>
will be changed .

Troubleshooting

If you experience a problem with the unit, please take a moment
to review the following information before requesting service . If it
still does not operate correctly, contact the retailer where you pur-
chased the unit .
TEAC HR Remote/TEAC AVR Remote
"Searching for device" or "Select device" continues to
appear and the screen does not change
e Confirm that the wired LAN used by the unit and the wire-
less LAN used by the device with the app are on the same
network .
e Confirm that the IP address has been set on the unit .
e Confirm that the wired LAN can be accessed from the wire-
less LAN . The wireless LAN access point security might be set
to allow only wireless LAN to access the Internet . For details,
refer to the operation manual of the wireless LAN access point
being used .

Internet radio

Cannot connect to the Internet.
e Confirm that a computer can connect to the Internet using
the same network .
e Enter a correct network connection password .
e Check the settings of the network's firewall .
e Confirm that the station exists and that its address has not
changed .
e If the Internet connection is unstable or slow, both the unit
and the remote app might take a long time to function and
respond .
Audio files
Playback is not possible.
e Check the file format . See "Audio files playable by this unit" on
page 4 .