PL 31.12 Maintenance/Installation/Removal Kits (3 of 4)..........5-68 PL 12.111 HVF Ejector, Pressing and Support (2 of 3)........... 5-35 PL 31.13 Maintenance/Installation/Removal Kits (4 of 4)..........5-69 PL 12.115 HVF Ejector, Pressing and Support (3 of 3)........... 5-36 Parts Lists November 2015 Xerox® ColorQube® 9303 Family...
Page 3
PL 92.10 Marking Unit Electronic PWB's ................ 5-103 PL 93.10 Ink Loader Assembly ..................5-104 PL 94.10 Cleaning Unit ....................5-105 PL 94.15 IOD Assembly....................5-106 PL 94.20 Drum Assembly ....................5-107 Common Hardware ......................5-108 Parts Lists November 2015 Xerox® ColorQube® 9303 Family...
Media path driver PWB to 3 tray module PWB harness (PJ401) 117E35700 Midrail front door switch harness 127K62260 Marking unit cooling fan NOTE: Also part of PL 31.11 Item 28. Parts Lists November 2015 PL 1.15 Xerox® ColorQube® 9303 Family...
5.10 Item 9) – Thumbscrew (Not spared) 017E11301 End stop NOTE: To clean the DADH, refer to ADJ 5.4. For the platen down sensor (Q62-019) refer to PL 62.16 Item 5. Parts Lists November 2015 PL 5.10 Xerox® ColorQube® 9303 Family...
Feed clutch (P/O PL 5.15 Item 28) (W/TAG D-005) NOTE: 1: For the feed motor drive belt, refer to PL 5.35 Item NOTE: 2: To reset the count, go to dC135. Parts Lists November 2015 PL 5.15 Xerox® ColorQube® 9303 Family...
802K62453 Top cover 802K93770 Top cover assembly (REP 5.1) 055K37570 Top access cover assembly (REP 5.2) NOTE: For the top cover interlock switch (S05-212), refer to PL 5.15 Item 11. Parts Lists November 2015 PL 5.20 Xerox® ColorQube® 9303 Family...
Page 11
Rear CVT roll bearing – Spacer (white) (P/O PL 5.10 Item 004E22560 CVT Motor bracket – Ground harness (Not spared) – CVT roll pulley (P/O PL 5.25 Item 5) Parts Lists November 2015 PL 5.25 5-10 Xerox® ColorQube® 9303 Family...
DADH Document sensor (Q05-102) – Lower cover (left) (P/O PL 5.35 Item 1) NOTE: This item is also supplied as a pair as a kit PL 31.11 Item 17. Parts Lists November 2015 PL 5.35 5-12 Xerox® ColorQube® 9303 Family...
Camshaft (P/O PL 10.10 Item 18) NOTE: HFSI. This component must be cleaned at regular intervals, refer to SCP 4 subsystem maintenance. To reset the HFSI count, go to dC135. Parts Lists November 2015 PL 10.10 Xerox® ColorQube® 9303 Family 5-13...
NOTE: 1.To reset the HFSI count go to dC135. NOTE: 2. Also part of PL 10.20 Item 16 and PL 10.20 Item NOTE: 3. To replace this item also order item PL 31.11 Item Parts Lists November 2015 PL 10.20 5-16 Xerox® ColorQube® 9303 Family...
Page 18
PL 12.00 OCT Item Part Description – OCT (complete) (P/O PL 31.11 Item 1) – Tray (P/O PL 12.00 Item 1) 826E32840 Thumbscrew 130E81311 OCT 90% full sensor (Q12-211) Parts Lists November 2015 PL 12.00 Xerox® ColorQube® 9303 Family 5-17...
Rear cover assembly (REP 12.1- 110) – Upper right hand cover (Not spared) 019K13380 Bin 1 alignment clip NOTE: Refer to ADJ 12.2-110 to align the LCSS to the machine. Parts Lists November 2015 PL 12.10 5-18 Xerox® ColorQube® 9303 Family...
Docking actuator (See NOTE) 003K20930 Docking latch assembly (See NOTE) (REP 12.16-110) 003K20940 Mounting stay assembly NOTE: Also comes as part of mounting stay assembly PL 12.15 Item 9. Parts Lists November 2015 PL 12.15 Xerox® ColorQube® 9303 Family 5-19...
Front belt clamp (Not spared) (ADJ 12.1-110) – Motor bracket (Not spared) – Not used – Pulley assembly (Not spared) – Belt tensioner (Not spared) – Spring (Not spared) – Idler (Not spared) Parts Lists November 2015 PL 12.30 5-22 Xerox® ColorQube® 9303 Family...
110K13990 Bin 1 lower limit switch (S12-191) – Not used 130E10360 Bin 1 Upper level sensor (Q12-188) (REP 12.11-110) – Actuator (Not spared) – Sensor support assembly (Not spared) Parts Lists November 2015 PL 12.35 Xerox® ColorQube® 9303 Family 5-23...
NOTE: The front tamper home sensor (Q12-180) and rear tamper home sensor (Q12-181) are bonded onto the tamper unit and are not replaceable. Failure of either of these sensors will require the replacement of the tamper assembly. Parts Lists November 2015 PL 12.45 Xerox® ColorQube® 9303 Family 5-25...
Do not install a new LCSS PWB until the cause of the damage to the old LCSS PWB has been determined. Go to the 12G-110 LCSS PWB Damage RAP. Parts Lists November 2015 PL 12.75 Xerox® ColorQube® 9303 Family 5-31...
Set of front and rear tamper arms 003K21101 Pressing plate kit 032K09682 Rear tamper assembly (REP 12.15- 171) NOTE: If both front and rear support finger assemblies are needed, then order PL 31.13 Item 4. Parts Lists November 2015 PL 12.110 5-34 Xerox® ColorQube® 9303 Family...
Bin 1 upper level sensor (transmitter) (Q12-188) (NOTE) (REP 12.76-171) NOTE: If either item 4 or 9 need replacing then both of these items should be replaced at the same time. Parts Lists November 2015 PL 12.111 Xerox® ColorQube® 9303 Family 5-35...
Bypass feed motor drive belt (Not spared) – Buffer feed motor drive belt (Not spared) – Transport motor 2 drive belt (A) (Not spared) – Transport motor 2 drive belt (B) (Not spared) Parts Lists November 2015 PL 12.120 Xerox® ColorQube® 9303 Family 5-37...
BM back stop link spring (REP 12.26-171) 012E20870 BM back stop link (REP 12.26-171) – LH frame plate (Not spared) 107E22600 BM guide home sensor (Q12-204) 127K54710 BM back stop motor assembly (REP 12.20-171) Parts Lists November 2015 PL 12.160 Xerox® ColorQube® 9303 Family 5-45...
Tri fold top cover interlock sensor (Q12-210) (REP 12.77-171) – Top cover locking stud (Not spared) 802E99581 Front cover 017K04190 Caster NOTE: For detail of bin 2, refer to PL 12.190. Parts Lists November 2015 PL 12.200 5-52 Xerox® ColorQube® 9303 Family...
– Feed roll pulley (Not spared) (REP 12.70-171) – Feed roll belt (Not spared) (REP 12.70-171) 023E23370 Feed roll drive belt 020E39921 Pulley gear (19T/20T) (BM) 020E39930 Pulley (38T) Parts Lists November 2015 PL 12.205 Xerox® ColorQube® 9303 Family 5-53...
Page 62
Netherlands/Belgium/France – 497K08460 Australia, New Zealand, Hong Kong, Singapore – 497K11290 USSG/XCL (CIF) – Fax PWB kits (see below for variants) – 607K08120 Line 1 – 607K08130 Line 2 Parts Lists November 2015 PL 20.10 Xerox® ColorQube® 9303 Family 5-61...
Feedhead assembly kit (REP 5.3) NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are shown for reference only. Parts Lists November 2015 PL 31.10 5-66 Xerox® ColorQube® 9303 Family...
NOTE: 1: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are shown for reference only. NOTE: 2: Refer to GP 24 for contents of the hardware kit. Parts Lists November 2015 PL 31.11 Xerox® ColorQube® 9303 Family 5-67...
Scan drive belt (REP 62.8) – Not used – Scanner harness bracket (Not spared) 127K44880 Carriage motor and bracket assembly NOTE: Refer to ADJ 62.1 for the optics cleaning procedure. Parts Lists November 2015 PL 62.16 5-72 Xerox® ColorQube® 9303 Family...
Paper edge guide (P/O PL 31.11 Item 12) – Guide securing stud (P/O PL 31.11 Item 12) NOTE: Refer to ADJ 73.1 to set the tray 3 paper guides. Parts Lists November 2015 PL 73.15 5-76 Xerox® ColorQube® 9303 Family...
Bearing (P/O PL 73.16 Item 13) 003K20701 HT & main harness latch NOTE: The Latch stop is also supplied as part of tray 3 assembly kit PL 31.11 Item 31. Parts Lists November 2015 PL 73.16 Xerox® ColorQube® 9303 Family 5-77...
74.10 Item 1) (REP 81.3) – Drive belt (Not spared) – Nudger roll drive clutch (P/O PL 74.10 Item 1) NOTE: To reset the HFSI count, go to dC135. Parts Lists November 2015 PL 74.10 5-78 Xerox® ColorQube® 9303 Family...
Front door handle 848E46011 Front door bracket (attached to frame) 848K66270 Front door assembly – Xerox logo (P/O PL 81.11 Item 11) – Door shield assembly (P/O PL 81.11 Item 2) – Name plate label (see below for variants) –...
Gear 31 (P/O PL 81.25 Item 1) – Feed roll kit (REF: PL 31.11 Item – Shim (P/O PL 81.25 Item 1) 019E74540 Slide pad NOTE: To reset the HFSI count, go to dC135. Parts Lists November 2015 PL 81.25 Xerox® ColorQube® 9303 Family 5-87...
Tray up limit switch (S73-384) (P/O PL 81.30 Item 1) – Feed roll kit (REF: PL 31.11 Item – Shim (P/O PL 81.30 Item 1) NOTE: To reset the HFSI count, go to dC135. Parts Lists November 2015 PL 81.30 Xerox® ColorQube® 9303 Family 5-89...
Feed roll kit (Pack of 3) (REF: PL 31.11 Item 26) (REP 81.7) 604K95530 Feed roll retrofit kit (W/TAG P-002) NOTE: To reset the HFSI count, go to dC135. Parts Lists November 2015 PL 81.45 5-92 Xerox® ColorQube® 9303 Family...
31.11 Item 23) NOTE: If an entire crank (PL 91.10 Item 13 or PL 91.10 Item 14 ) needs to be replaced then 2 parts need to be ordered. Parts Lists November 2015 PL 91.10 Xerox® ColorQube® 9303 Family 5-99...
NOTE: 3. When replacing the umbilical it is recommended that the printhead gaskets are replaced on printheads that are over 12 months old with PL 31.13 Item 9. Parts Lists November 2015 PL 91.20 Xerox® ColorQube® 9303 Family 5-101...
NOTE: 3. When replacing the umbilical it is recommended that the printhead gaskets are replaced on printheads that are over 12 months old with PL 31.13 Item 9. Parts Lists November 2015 PL 91.25 5-102 Xerox® ColorQube® 9303 Family...
(PJ203) 117E35730 Marking unit front components harness (PJ304) – Memory module (256 MB) (P/O PL 31.13 Item 1) NOTE: To identify the type of cable, refer to GP 46. Parts Lists November 2015 PL 92.10 Xerox® ColorQube® 9303 Family 5-103...
Item 19) NOTE: 1: Drum cleaning motor assembly is mounted onto rear frame NOTE: .2: A Cleaning unit handle kit is also available, refer to PL 94.20 Item 27. Parts Lists November 2015 PL 94.10 Xerox® ColorQube® 9303 Family 5-105...
NOTE: 1. HFSI. This component must be cleaned at regular intervals refer to SCP 4 subsystem maintenance. To reset the HFSI count go to dC135. NOTE: 2. Also contains rear bearing. Parts Lists November 2015 PL 94.20 Xerox® ColorQube® 9303 Family 5-107...
Need help?
Do you have a question about the ColorQube 9303 and is the answer not in the manual?
Questions and answers