Related Manuals for Imation defender H200 +BIO
Summary of Contents for Imation defender H200 +BIO
-
Page 1: Table Of Contents
DEFENDER™ H200 +BIO USER GUIDE Contents Introducing Defender™ H200 +BIO Minimum System Requirements Device accessories Imation Documentation Getting Started Plugging in the device Personalizing a device Accessing data on the device Logging into and out of the device Saving and opening files... -
Page 2: Introducing Defender™ H200 +Bio
Your Defender H200 +BIO package includes a dual-head USB cable. For information on how to use this cable, see “Plugging in the device” on page 4. Defender H200 +BIO gets the power it requires from your computer when you connect it to the USB port(s) on your system. An external power supply is not provided or required. -
Page 3: Imation Documentation
IMATION DOCUMENTATION You can find detailed instructions about using and managing Defender™ H200 +BIO in the ACCESS Standard User Guide. Topics include: • Information about Imation Defender Collection Devices • Personalizing the device • Accessing the device • Managing users •... -
Page 4: Getting Started
Defender™ H200 +BIO. To plug in Defender H200 +BIO using one USB port Plug the smaller (Mini-A) USB connector into the back of the Defender H200 +BIO device. Plug the black Type A USB connector into the host computer. Do not plug in the gray Type A USB connector. - Page 5 (If necessary, in the notification area at the far right of the taskbar, click the Imation Defender icon, and then click Personalize from the menu.) On the main page of ACCESS Standard, click Personalize Device.
- Page 6 GETTING STARTED cont. Note 1: If you do not complete the personalization process you may have to repeat some of the above steps the next time you connect the device. For more information about the personalization process, see the ACCESS Standard User Guide. Note 2: After you successfully complete the personalization process, you can access your private partition using a file manager.
-
Page 7: Accessing Data On The Device
ACCESSING DATA ON THE DEVICE After you personalize a device, only registered users can authenticate to it. Authentication involves logging into the device using a password, fingerprint, or both. The authentication method you use depends on the capabilities of the device and the profile applied to the device. After you successfully log in, you can save files to, and open files from, your private partition. -
Page 8: Saving And Opening Files
ACCESSING DATA ON THE DEVICE cont. SAVING AND OPENING FILES When you plug in your device both the application drive and the private partition display in a file manager, such as Windows Explorer, with an associated drive letter for each partition. ®... -
Page 9: Troubleshooting
For information about how to properly plug in the device to ensure adequate power, see “Plugging in the device” on page 4. • Check the light emitting diode (LED) status of Defender H200 +BIO to assess the power output to the device and the state of the device. - Page 10 TROUBLESHOOTING cont. Table 1: LED status for devices LED status Description Flashing red The device is either powering up or is totally blocked. When totally blocked, no authentication methods are available to allow a user to log into the device; this indicates that the device needs to be recycled.
-
Page 11: Warranty Information
Imation’s option. Proof of purchase is required to obtain warranty service. This warranty does not apply to normal wear or bundled software. Imation will not be liable for any lost data or other indirect, incidental or consequential damages.
Need help?
Do you have a question about the defender H200 +BIO and is the answer not in the manual?
Questions and answers