Troubleshooting
Problem
Range will not function.
Oven does not operate in
self-clean.
Oven is not clean after self-
clean cycle.
Broil does not work.
Door will not open.
Oven light will not work.
Igniters will not work.
Igniters sparking but no
flame ignition.
Igniters sparking
continuously after flame
ignition.
Burner ignites but flame is
large, distorted, or yellow.
Possible Cause and/or Remedy
Range is not connected to electrical power:
Have electrician check power circuit breaker,
wiring, and fuses.
Door is not shut tight enough for automatic
door latch to lock.
Temperature control knob not rotated all the
way past clean until it stops.
Temperature control knob is rotated too far
past broil position.
Oven is still in self-clean mode. If oven is
hot, door latch will release when safe
temperature is reached.
Light bulb is burned out.
Range is not connected to power.
Circuit is tripped.
Fuse is blown.
Range is not connected to power.
Gas supply valve is in "OFF" position.
Gas supply is interrupted.
Power supply is not grounded.
Power supply polarity is reversed.
Igniters are wet or dirty.
Burner ports are clogged.
Unit is being operated on wrong type of gas.
Air shutters not properly adjusted.
33
Need help?
Do you have a question about the VDSC530 and is the answer not in the manual?
Questions and answers