Sharp ER-A770 Dealer Knowledge Book page 25

3. AUTO key - Eject Card Key:
Prior to creating this Auto key for ejecting the card, it is necessary to also create a zero-priced PLU
which will become part of the Auto sequence entry to the Charge-4 media key.
In this case, it is assumed that the PLU code 999 has been previously set as a zero-priced PLU.
Entering the PGM2 mode may be achieved from the REG mode as follows:
1) Depress the [MODE] key
2) Select 10 AUTO KEY MODE
3) Depress the [AUTO3] key
4) Enter the PLU code "999"
5) Depress the [PLU/SB] key
6) Depress the [CH4] key
5) Depress the [ENTER] key
6) Depress the [AUTO3] key
7) Depressing the [CANCEL] key will return the ER-A770 to the REG-mode
1
Designs and specifications are subject to change without notice.
2
Pr Pr Pro o o o o g g g g g r r r r r amming Pr Pr
3
amming amming amming amming
Page / 23