IMPORTANT SAFETY INSTRUCTIONS ATTENTION: CAUTION RISQUE DE CHOC ELECTRIQUE RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
SAFETY WARNING CLASS 1 LASER PRODUCT LUOKAN 1 LASERPLAITE KLASS 1 LASERAPPARAT THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARA- TUS AS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS. LE PRESENT APPAREIL NUMVERIQUE N’EMENT PAS DE BRUITS RADIOELECTRIQUES DEPASSANT LES LIMITES APPLICABLES AUX APPAREILS NUMERIQUES DE LA CALSSE B...
REMOTE CONTROL (Figure 3.) 7 51 Batterij niet weggooien maar inleveren als KCA (Figure 4.) (Figure 5.) (Figure 6.)
Page 6
SIMPLE T 751 SYSTEM (Figure A.) TAPE IN / OUT SOPHISTICATED T 751 SYSTEM (Figure B.) AUDIO / GAMES SUBWOOFER TAPE IN / OUT IN / OUT IN / OUT VIDEO STEREO AUDIO VIDEO STEREO AUDIO...
Page 7
THE OPTICAL DIGITAL INPUT 1 IS LINKED TO THE VIDEO 1 INPUT. THE COAXIAL DIGITAL INPUT 2 IS LINKED TO THE VIDEO 2 INPUT. COMPOSITE DIGITAL VIDEO OUT COAXIAL S VIDEO OUT VIDEO STEREO AUDIO...
Page 8
NAD T 751 SURROUND SOUND RECEIVER NOTES ON INSTALLATION. Your NAD T 751 should be placed on a firm, level surface. Avoid placing the unit in direct sunlight or near sources of heat and damp. Allow adequate ventilation. Do not place the unit on a soft surface like a carpet.
VCR to Video In (only Video Composite for Video 4) for Video playback. Connect the Video Input of the VCR to Video Out of the NAD T 751 receiver for recording of video signals. Refer also to the description of S-Video and Video Composite above in this section.
4 ohms min. tion with such other units, connect the T 751’s NAD- Link Out to the NAD-Link In on the other unit. NAD- Link connectors can be daisy-chained, IN to OUT, so that a whole system can be controlled from the remote control facilities of one unit.
The total power consumption of any components connected to the AC outlets may not exceed 120 Watts. Never connect the mains lead of a power amplifier to either outlets of the NAD T 751. NOTE: The AC outlets should be used with units with a COMBINED power consumption of no more than 120 Watts.
The DISPLAY button toggles the display to show either the station frequency or user entered station name. If no user name was entered the display will just flash once. 4. FM MUTE / MONO This button combines two functions; it switches the tuner from Stereo to Mono and disengages the mut- ing circuitry at the same time.
Page 13
have a start of end position. Volume can also be adjusted from the remote control handset using the MASTER VOLUME Up or Down buttons (No. 4 in remote control drawing). The Volume control does not affect recordings made using the Tape, Video 3 and Video 4 outputs but will affect the signal going to the Pre-amp output (Audio Pre Out).
Page 14
This way you can watch a DVD player or video whilst listening to the CD player. The display indicates which video signal is routed to the MONITOR OUT sockets (No. 8 on back panel).
Apart from all the key functions, the T 751’s Remote Control handset also gives access to func- tions not available on the front panel. It also has addi- tional controls to remotely operate NAD Cassette and CD machines. It will operate up to a distance of 16ft (5m).
/ ; engages Play or toggles between Play and Pause ∞ or § engages Track skip; press once to go to the next track or to return to start of current or previ- ous track. DISC Go to next disc (for NAD CD changers).
ON SCREEN DISPLAY (OSD) The NAD T 751 is equipped with an elaborate On Screen Display facility (OSD). As the OSD is an essential tool to set up the various parameters for Surround sound correctly it is recommended that you connect your monitor or television to the T 751.
CHANNEL BALANCE LEFT CENTER RIGHT REAR L REAR R DO NOT SAVE & EXIT SAVE & EXIT • The T 751 allows the volume of each speaker to be individually trimmed so that none of the speakers dominates in playback and detracts from the sur- round illusion.
woofer. This preset is particularly useful for large rooms. Preset 2: Main - LARGE; Center - SMALL; Surround - SMALL; Subwoofer - OFF This preset is necessary for a home theater system that does not have a subwoofer. The bass frequen- cies from the center and surround channels are redi- rected to the main speakers.
Page 20
Dolby Digital uses a dedicated Low Frequency Effects (LFE) channel. If a subwoofer has been selected, the LFE channel will be fed to the sub- woofer output. Channel Delays: For the best surround sound performance it is important that sound from all speakers reach the lis- tener’s ears at the same time.
AC mains. Failure to observe the above may result in damage to the T 751 or any ancillary components attached to it. If in doubt over the connections, installation and operation of the 12V trigger output consult your NAD dealer.
TROUBLESHOOTING PROBLEM NO SOUND NO SOUND ON ONE CHANNEL NO SOUND ON SURROUND CHANNELS NO SOUND ON CENTER CHANNEL “DOLBY DIGITAL” OR “DTS” AUTO-DETECTION FUNCTION DOES NOT WORK WEAK BASS/ DIFFUSE STEREO IMAGE REMOTE CONTROL HANDSET NOT WORKING NO SOUND WITH TUNER NOISE, HISS ON AM AND FM DISTORTION ON FM WHISTLES OR BUZZES ON...