Set-Up Genius Rc; Scott Smart Cable Routing; Mechanics Hint - Scott Genius RC Series Owner's Manual

manualK_rcseries_e.qxd 26.8.2005 9:56 Uhr

SET-UP GENIUS RC

The Set-Up of the Genius Shock is shown in the
manual "Scott Genius Shock 06" attached to this bike
and can be done within a few minutes.
In case you want even more detailed figures of air
pressure or tuning hints, you can download a program
www.scottusa.com
under as a pdf file.
[2]
2
O W N E R S M A N U A L
BEDIENUNGSANLEITUNG
MANUEL D UTILISATION
BIKE
OWNERS
MANUAL
CONFORME AUX EXIGENCES DE SECURITE - NF R30-020 ©2005 Scott Sports SA – all rights reserved
WWW.SCOTTUSA.COM
Genius Shock Manual
OWNER MANUAL 2006
04
Seite 6
J

SCOTT SMART CABLE ROUTING

The direct and straight cable system on all our full
suspension models allows Smart Cable Routing which
is very resistant against water and dirt.
To change the cables simply unscrew and open the
three cable brackets on the downtube.
On the left side of the downtube you will find the cable
housings of the rear brake and the TC-system, on the
right side for the rear derailleur.
[4]
4
Smart Cable Routing

MECHANICS HINT

The outer housing of the cables can also be fixed on
the bottle cage with cable fixers, the two brackets
below the cage are not needed anymore.
[5]
5
Mechanics hint
05