Do you have a question about the HP164 and is the answer not in the manual?
Questions and answers
Cathy
March 31, 2025
How do I fill the oil correctly
1 comments:
Mr. Anderson
March 31, 2025
To correctly fill the oil in a Mountfield HP164:
1. Use SAE 10W-30 oil. 2. Do not overfill. The oil tank capacity is 0.45 litres. 3. Remove the oil filler cap and check the level with the dipstick. 4. Fill only up to the correct level marked on the dipstick. 5. Ensure the cap is securely replaced after filling.
Please Read These Instructions Before Using Your Mower Operating Instructions for models HP164 & SP164 Lawnmowers with RS 100 engine Product Codes: 297411048/SF 297412048/SF Do not return this product to store, please call Supported by the Service Link Helpline Products with petrol in cannot be accepted...
Thank you for purchasing a Mountfield lawnmower. This machine will give you many years of safe and reliable service if operated in accordance with these instructions.Please read and understand these Operating Instructions before using your mower. Failure to do so could result in personal injury or damage to the equipment.
Acoustic power level according to directive 2000/14/EC Conformity mark according to directive 2006/42/EC Year of manufacture Type of lawnmower Serial number Name and address of manufacturer Article code Engine power and speed Weight in kilograms As soon as you have purchased the machine, do not forget to write the identification numbers (3-4-5-7) in the spaces on the last page of the manual.
Page 5
The following safety precautions must be observed at all times. Please read them carefully. TRAINING 1) Read the instructions carefully. Get familiar with the controls and proper use of the equipment. Learn how to stop the engine quickly 2) Only use the lawnmower for the purpose for which it was designed, i.e. for cutting and collecting grass. Any other use can be hazardous, causing damage to the machine.
13) On power-driven models, disengage the drive clutch before starting the engine. 14) Start the engine carefully, following the instructions and keeping feet well away from the blade. 15) Do not tilt the lawnmower when starting the engine. Start the engine on a flat surface that is free of obstacles and tall grass.
HOW TO GET MOWING Your Mountfield lawnmower does not contain petrol or oil and these must be added before use. Running the mower with insufficient oil can cause serious damage to the engine and will invalidate your warranty. NEVER TIP THE MOWER ONTO ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
Page 8
Read and understand the Safety Precautions before using your mower. • Put Mountfield 4-stroke, or an SAE 10W-30 oil, in the oil filler (Figure 5). Do not overfill, the oil tank capacity is 0,45 litres. Mountfield oil, part number MX855, is available from any Mountfield stockist or B&Q store.
• If the blade is damaged it should be replaced. Replacement blade kits are available from your Mountfield stockist. The part number for the blade kit is MS1199. If in doubt refer to your dealer, or telephone 0845 601 4221.
FAULT FINDING PROBLEM SOLUTION Check there is ample clean, fresh fuel in the tank. Any stale fuel needs to be drained from the machine. Engine will not start Check the cutter blade is not fouling the ground preventing free rotation. Check the Operator Presence Control (OPC) lever is fully released.
1 year from the date of purchase. Please note that if the machine is used commercially the guarantee period is 90 days from the date of purchase. If you experience any problem with your Mountfield lawnmower please call our technical helpline on 0845 601 4221 and our operators will endeavour to solve your problem.
On delivery of your new Mountfield mower, we suggest that you complete the box to the right. The information for your machine is on the serial number label, which is fixed on the cutter deck at the base of the handles. You will be asked for these details if you have any problems or require spare parts.
Need help?
Do you have a question about the HP164 and is the answer not in the manual?
Questions and answers
How do I fill the oil correctly
To correctly fill the oil in a Mountfield HP164:
1. Use SAE 10W-30 oil.
2. Do not overfill. The oil tank capacity is 0.45 litres.
3. Remove the oil filler cap and check the level with the dipstick.
4. Fill only up to the correct level marked on the dipstick.
5. Ensure the cap is securely replaced after filling.
This answer is automatically generated