Setup - Mio Fuse Complete User Manual

The display will show
charged, the display will show:
When the battery level is low, Mio FUSE will show
in Mio GO when the Mio FUSE is connected to the app.
Each full charge will provide approximately 6-7 days of use, if heart rate monitoring is used for 1
hour per day.
For important battery care and battery safety information, please see Battery Care.

Setup

Initial setup of the Mio FUSE must be done through the Mio GO app. Download Mio GO onto
your smartphone from:
After Mio GO is installed, open the app and follow the setup instructions.
Set Up Profile
Set up your user profile. Your information will allow Mio GO to provide more accurate data and
a better interactive training experience.
Connect Mio Device
1. Turn on the Bluetooth function of your smartphone.
2. Within Mio GO, select your Mio FUSE from the list of devices found. Once connected,
the time displayed on Mio FUSE will automatically sync with the clock on your
smartphone.
3. On the upper right hand corner of the Workout screen, tap
device. See Device Settings for more information about these settings:
Choose your preferred heart rate training mode and set your heart rate zone limits
•
(See Heart Rate Training Modes for more information).
Customize Mio FUSE screens and display options.
•
Set your daily goal.
•
Select left/right arm position.
•
Turn on/off vibration alert.
•
Turn on/off Screen Lock feature.
•
4. Update Mio FUSE firmware to version 1.20 or higher to enable Sleep Tracking.
5. Check your Mio FUSE firmware version at the bottom of the Mio GO Setup screen.
6. If your firmware version is lower than 1.20, force close the Mio GO app by:
iPhone: Press the home button twice and swipe up on the app.
•
Android: Minimize Mio GO and click the X to close.
•
Mio FUSE User Guide
to indicate that the battery is charging. Once the battery is fully
. You can also see the battery level
>
to customize your
05