Advertisement
Quick Links
Advertisement
Related Manuals for MB QUART QUBFour
Summary of Contents for MB QUART QUBFour
- Page 1 QUBFour Bluetooth Speaker...
-
Page 2: Table Of Contents
CONTENTS Page 3 Important Safety Instructions Controls Charging Bluetooth Connection Auxiliary Input Receiving and Making Calls Specifications Warranty... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read, follow and keep these instructions. • Do not use this product near water or wet surfaces. • Clean only with a dry cloth. • Do not expose to extreme high or low temperatures. • Only use the supplied cables for charging and playback. -
Page 4: Controls
CONTROLS Function Button Volume Up \ Down Pairing LED Power Switch... -
Page 5: Charging
Using the supplied charge cable CHARGING The first time you use connect to a 110V wall outlet. your Bluetooth speaker, please charge it for at While charging, the power switch least 3 hours. During the on the side of the unit will turn first charge, do not turn red. -
Page 6: Bluetooth Connection
When the speaker is turned on, you should hear a voice prompt and the pairing LED on the front of the speaker will flash indicating that pairing mode is activated and it is search- ing for a Bluetooth source. Go to the Bluetooth menu of your source device and connect to QUBFour from the list of devices. If asked for a code, enter 0000. Once the connection is achieved, the pairing LED will stop flashing and the speaker will emit two short beeps. - Page 7 TROUBLE CONNECTING? Make sure that no other source in range is connected. Only one connection can be made at a time, The speaker may automatically connect to a source it has been paired with in the past. Turn off the speaker, then on again. Try pairing again. Make sure the source is Bluetooth compatible and that the Bluetooth is activated.
-
Page 8: Auxiliary Input
AUXILIARY INPUT CONNECTION Insert the supplied 3.5mm cable into the speaker’s AUX input. Connect the other end to the output of your source device. The power switch light will turn off. You can now play your content. The Bluetooth will be disabled anytime a 3.5mm cable is inserted into the AUX input. -
Page 9: Receiving And Making Calls
RECEIVING AND MAKING CALLS Your speaker will allow you to make hands free calls provided your phone is connected via Bluetooth. The AUX connection cannot be used for this function. To make a call: Use the phone as normal, select the Bluetooth speaker when prompted. To receive a call: Either push the FUNCTION button on the top of the speaker or answer the call with the phone making sure to select the Bluetooth speaker when prompted. -
Page 10: Specifications
SPECIFICATIONS Active Drivers: 2 - 50mm (1.97 Inches) Play Time: 10 to 12 Hours Passive Drivers: Recharge Time: 3.0 Hours Amplifier Power: 12 Watts Bluetooth Profiles: HFP-A2DP/ARVCP Frequency Response: 60Hz - 18KHz Bluetooth Range: 20 meters in open space Battery Type: Lithium-ion Polymer Dimensions: 85 x 160 x 75 (mm) Battery Capacity:... -
Page 11: Warranty
This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. The Bluetooth™ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MB Quart is under license. - Page 12 MBQuart products are designed and engineered in the USA by 847-540-7700 www.maxxsonics.com...
Need help?
Do you have a question about the QUBFour and is the answer not in the manual?
Questions and answers