DisplayPort Extender over 2 LC Fibers Important Safety Instructions GENERAL SAFETY INFORMATION Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this product near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Page 5
DisplayPort Extender over 2 LC Fibers Operating Notes • Fiber optic cables must be treated carefully when connectors are exposed. They are susceptible to dust which can cause pixel loss. • The DisplayPort Extender over 2 LC Fibers works for all DisplayPort displays and supports resolution up to WQXGA (2560 x 1600 @ 60Hz).
The DisplayPort Extender over 2 LC Fibers ships with the items listed below. If any of these items are not present in your box when you first open it, immediately contact your dealer or Gefen. • (1) DisplayPort Extender over 2 LC Fibers (Sender module) •...
Getting Started Module Layout Sender Module Back Front Bottom page | 2...
Page 13
Getting Started Module Layout Name Description Power indicator This LED indicates the power status of the Sender module. See Connecting the DisplayPort Extender over 2 LC Fibers more information. Power receptacle Connect the included 5V DC power supply to this power receptacle. DisplayPort connector Use a DisplayPort cable to connect the source to this connector.
Getting Started Module Layout Receiver Module Back Front Bottom page | 4...
Page 15
Getting Started Module Layout Name Description Power indicator This LED indicates the power status of the Receiver module. See Connecting the DisplayPort Extender over 2 LC Fibers more information. Power receptacle Connect the included 5V DC power supply to this power receptacle. DisplayPort connector Use a DisplayPort cable to connect the display to this connector.
3 times, then flash quickly as long as power is applied. See Table 2.2 on the next page for details on LED status. Sample Wiring Diagram DISPLAYPORT CABLE FIBER OPTIC CABLE Computer Sender Receiver HD Display EXT-DP-CP-2FO page | 6...
Page 17
Getting Started Installation Table 2.1 - Fiber optic cable distance Maximum distance 500 feet (150 meters) 1000 feet (300 meters) Category OM2 / OM3 Core size / cladding 62.5µm / 125µm 50µm / 125µm diameter Table 2.2 - LED indicator status Status Conditions •...
Need help?
Do you have a question about the EXT-DP-CP-2FO and is the answer not in the manual?
Questions and answers