Manual Tuning - Fm - Roberts Classic DAB 2 User Manual

Manual tuning - FM

1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the On/Standby button to switch on your radio.
3. If you are listening in DAB mode, press and hold the Mode button.
'FM' will show on the display.
4. Rotate the Tuning/Select control to tune to a station.The frequency will
change in steps of 50kHz. If the radio is tuned to a station of suffi cient
signal strength with RDS information present, then the display may
change to show the station name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Adjust the Volume to the required setting.
7. To switch off your radio press and release the On/Standby button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2,7
3
4
6
6
14