Troubleshooting; Error Code - Logik LVD6W13 Instruction & Installation Manual

Drying cycle is
unusually long.
Piles on clothes after
drying.
Unusual knocking
noises from inside
dryer.
Unusual knocking noise
from Vent Hose.

Troubleshooting

Error Code

When an error occurs, the LED will display an Error Code and the machine will beep. If the fault
cannot be resolved, repair is needed.
1. Press the Power button to switch off the dryer.
2. Pull out the mains plug.
3. Call a qualified service agent for assistance.
Error
LED Indication
Code
Light indicator blinks twice
E1
a second.
Standard and Light
E3 indicators blink twice per
second. Blinks slowly.
Extra Dry Indicator blinks
E4
rapidly.
• Lint filter / Vent Hose is
clogged.
• Laundry load exceeds
drying capability of selected
programme.
• Laundry insufficiently spun
before using dryer.
• Some synthetic fabrics or
crease-proof clothing will
result in piling after rubbing
against each other during
the drying cycle.
• Heavy wet clothes are
turning, or clothes have
zips, buttons, or other
adornments that are
knocking on the drum
interior.
• The dryer forces damp air
out through the Vent Hose
at some force. This causes
the Vent Hose to knock
against surfaces.
Description
Dryer has
overheated.
Internal
thermostat error.
Internal
thermostat error.
• Clean the lint filter / Vent Hose before
and after each use of the dryer.
• Select a more suitable drying
programme, or remove some laundry.
• Spin laundry in washing machine
thoroughly before using dryer.
• Turn the clothes inside out.
• Use a fabric softener during washing.
• This is normal and NOT a fault.
• This is normal and NOT a fault.
Probable Cause
Circuitry fault (NTC or PCB).
Thermostat elements are faulty.
Thermostat is faulty.
21