Safety PrecautionS The lightning flash with an arrowhead within CAUTION a triangle alerts you to uninsulated dangerous RISK OF ELECTRIC SHOCK voltage within the product’s enclosure that DO NOT OPEN could cause an electric shock. The exclamation point within a triangle WARNING: TO REDUCE THE RISK OF ELECTRIC alerts you to the presence of important SHOCK, DO NOT REMOVE COVER (OR BACK).
iMPortant Safety inStructionS MAINS PLUG UNITS SUPPLIED WITH MOULDED MAINS PLUG 1. If the mains plug fitted to the AC cord supplied is not suitable for your mains outlet it may be necessary to cut it off. Carefully dispose of the severed plug.
DiSc forMatS This unit can playback: JPG-cD DVDS picture viewer [8CM/12CM DISC] cD-r/cD-rW AUDIO CDS Compatible [8CM/12CM DISC] REGION MANAGEMENT INFORMATION Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc.
inStaLLation REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it.
reMote controL USING THE REMOTE CONTROL • Point the remote control at the REMOTE SENSOR located on the unit. • When using this unit in a very brightly lit area, the infrared REMOTE CONTROL SENSOR may not work properly. • The recommended effective distance for using the remote control is about 16 feet (5 metres). TO CHANGE THE REMOTE CONTROL BATTERy 1.
reMote controL reference GuiDe PREV button Select previous chapters or tracks on a disc. 9) MIX button RADIO Press to select Teletext with a TV programme. EXIT button Press to exit the menu and return directly to normal viewing. buttons : Fast reverse playback.
Page 9
reMote controL reference GuiDe NEXT button Select next title, chapter or track on a disc. 27) LIST button RADIO Press to display the channel list in TV/DTV mode. STOP button Stop playing a disc. GUIDE button Press to display the Programme Guide in DTV mode. PLAy button Press to start and resume playback of a disc.
unit reference GuiDe FRONT & SIDE VIEW / I button Turns the unit on and off. PLAy button Press to start or resume playback of a disc. STOP button Press to stop playing a disc. 4) MENU button Press to display the on-screen TV menu. 5) FUNCTION button Select DTV, TV, AV2/SCART, DVD, PC or AV1.
connectinG a tV antenna CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - RF output of a cable system - RF output of a satellite system Note: For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna.
unit oPeration TURNING THE UNIT ON When the AC power cord is connected, press the button on the unit to turn it on. Press the FUNCTION button to select the desired mode (DTV, TV, AV2/SCART, DVD, PC or AV1). If you select DVD, the DVD logo will appear on the screen.
7 Day eLectronic ProGraMMe GuiDe (ePG) for DtV While watching a DTV programme, you can press the GUIDE button to display the PROGRAMME GUIDE menu, and check for programme information. current channel current date number and name and time current programme and time programme date programme time...
tV SetuP TV SETTING (only in TV or DTV mode) 1. Press the TV MENU button. 2. Use the button to select TV SETTING. 3. Use the button to select the options (Auto Tuning, DTV Manual Tuning, ATV Manual Tuning, Programme Edit, CI Information), press the ENTER/OK button to enter the settings.
tV SetuP PICTURE MENU 1. Press the TV MENU button. 2. Use the button to select the PICTURE. 3. Use the button to select the options (Picture Mode, Contrast, Brightness, Colour, Sharpness, Colour Temp, PC Setup), adjust them using the button.
tV SetuP SOUND MENU 1. Press the TV MENU button. 2. Use the button to select the SOUND. 3. Use the button to select the options (Sound Mode, Treble, Bass, Balance, AVL), adjust them using the button. 4. Press the TV MENU button to return to previous menu.
tV SetuP SETUP MENU 1. Press the TV MENU button. 2. Use the button to select the SETUP. 3. Use the button to select the options (Language, Audio Language, Subtitle Language, Restore Setting), adjust them using the button. 4. Press the TV MENU button to return to previous menu.
teLeteXt Teletext is an information system that displays text on your TV screen. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. Please Note On Screen Display is not available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available.
Page 19
teLeteXt DOUBLE HEIGHT TEXT If you have difficulty reading the text on the TV you can double the height of the text. Press the SIZE button. The top half of the page will be displayed in double height text. Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page.
connectionS CONNECTING TO DEVICES WITH A COMPOSITE (yELLOW RCA-TyPE) VIDEO OUTPUT To connect to A/V devices such as a VCR, camcorder or video game system. - Connect to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO and VIDEO IN).
connectionS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and stereo audio cable (not included) as shown. M a k e s u r e yo u c o n n e c t t h e c a b l e f r o m t h e computer (PC Connector and PC AUDIO OUT) to this unit ( MONITOR / VGA and AUDIO - PC IN).
cD/DVD oPeration This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit.
cD/DVD oPeration FAST FORWARD / FAST REVERSE 1. Press the SEARCH or SEARCH button when a disc is playing. • The disc begins a fast scan at two times normal (x2) speed. • Each time the SEARCH button is pressed, the speed of the fast scan changes. 16 x 16 x 16 x...
SPeciaL function DISPLAy (DVD) While the disc is playing, press the DISPLAy button repeatedly to display information on operation status. Chapter Elapsed Chapter Elapsed Chapter Remain Chapter Remain Title Remain Title Remain Display Off Display Off Tt 01/03 Ch 03/12 Tt 01/03 Ch 03/12 Tt 01/03 Ch 03/12 Tt 01/03 Ch 03/12...
rePeat PLayBacK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) REPEATING A CHAPTER (DVD) You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ ”...
DVD ProGraMMaBLe PLayBacK PROGRAMMABLE MEMORy The two types of programmed playback provided by this unit is title/chapter programmed playback. TITLE/CHAPTER PROGRAMMED PLAyBACK 1. Press the MEMORy button in PLAY mode. 2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For example : 01 02, 02 05, 02 11.) It will move to the next item automatically.
cuStoMiZinG tHe function SettinGS VIDEO SETUP 1. Press the SETUP button in stop mode. Video System Language 2. Use the button repeatedly until VIDEO SETUP - - Video Setup Page - - appears. Tv Mode 3. Use the button to select the option (Tv Mode, Brightness Contrast Brightness or Contrast), then press the...
cuStoMiZinG tHe function SettinGS Parental Lock DVDs are rated according to their content and some are equipped with a password function. The contents allowed by parental lock level and the way a DVD is controlled may vary from disc to disc.
LanGuaGe coDe LiSt Code Language Name Language Name Language Name Code Language Name Code Code Afar Frisian Malagasy Slovenian Abkhazian Irish Maori Samoan Afrikaans Scots Gaelic Macedonian Shona Galician Malayalam Somali Ameharic Arabic Guarani Mongolian Albanian Gujarati Moldavian Serbian Assamese Siswat Aymara Hausa...
trouBLe SHootinG GuiDe SyMPTOM CAUSE (AND REMEDy) No power. • Check that the AC power cord is connected. • Turn on the unit. The remote does not • Remove any obstacles between the remote and the unit. function. • Use the remote near the unit. •...
trouBLe SHootinG GuiDe SyMPTOM CAUSE (AND REMEDy) B a d P i c t u r e ( s n ow, • Check the location of the antenna and adjust it if necessary. m u l t i p l e i m a g e s , •...
Page 32
WARRANTy Your Technika appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please contact the TESCO electrical help line on 0845 4566767. Please have your original purchase receipt with you when you call. This warranty in no way affects your consumer rights.
Any Problems please call the Tesco Electrical Helpline: 0845 456 6767 QUICK INSTALLATION When you turn on your television set for the first time, be sure to place it on 20 cm a solid stable surface. To avoid danger do not expose the TV to water, or a heat source (e.g.
Need help?
Do you have a question about the LCD17DVDID-108 and is the answer not in the manual?
Questions and answers