Calibration Mode - CAS PD-II Manual

2. Calibration Mode

To go to calibration mode, turn on the power while pressing the calibration switch.
The display shows "CAL" three times, and then "C-0".
Mode Selection : [TARE] or [UNIT] key
Enter : [ZERO] key
MODE
C – 0
C – 1
C – 3
C – 4
C – 5
C – 6
C – 7
C – 9
MODE
C-4-1
Save Setting
C-4-2
Capacity Setting
C-4-3
Comma Setting
C-4-4
Capacity Setting
DESCRIPTION
Normal Mode
Span calibrated A/D value
Span Calibration
Capacity Display and Option Setting
Averaging A/D Value
Real A/D Value
% Calibration (10%~100%)
Gravity Constant
Calibration Mode
DESCRIPTION
Calibration Unit, Tare setting
Capacity setting
Comma setting
Save setting
C – 4 Setting
8