Using The Talk To Baby™ Two-Way Intercom; Turning The Nightlight On/Off; Setting A Lullaby; Using The Peep Mode Function - Lenovo ayden User Manual

OPERATION
Using the Talk to Baby™ Two-Way Intercom
With the simple press of a button you can talk to
your child at any time without entering
the nursery.
1. To talk, press and hold the (Talk) button on
the front of the monitor and release to listen.
2. To talk when using multiple cameras, select
the camera view (see "Changing the Camera
View") and press the (Talk) button, release
to listen.

Turning the Nightlight On/OFF

When using multiple cameras, select the desired camera (see "Changing the Camera
View") and press the Nightlight button

Setting a Lullaby

Choose from three different lullabies to soothe your baby to sleep.
1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate
the different lullabies.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
to turn the Nigthlight ON/OFF.
14
OPERATION

Using the PEEP Mode function

Voice activated technology helps conserve battery life by putting the system into
hibernation mode when sounds are not detected for 1 minute. If your child starts to cry
or make noise, the unit will automatically detect it. The preset noise level is set to a level
comparable to a casual conversation. To increase sound sensitivity to noise level in the
room, see "Sound Sensitivity Settings".
1. Press the Menu / Exit button and use the
Navigational arrow keys to navigate the Power
Save options.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
• To access live view manually when screen
if off, press the Power button ONCE.
• PEEP Mode extends the battery life up to
48 hours.

Changing the Camera View

1. Press the Menu / Exit button and use
the Navigational arrow keys to navigate the
Camera View options.
2. Press Select + to confirm your choice.
3. Press Menu / Exit button to save your
selection and return to main menu.
4. Repeat the steps above to return to
any other camera view.
• Selecting Scan View cycles through
cameras 1 to 4. Each camera view will appear
for 6 seconds per camera. (If more than one
camera is paired).
15