(1). Press the 0-9 number key on the remote controller to input
Old Password, the system defaults Password as"0000".
(2).If the password is input correctly, the cursor can move
onto Input New Password option, press 0-9 number key on the
remote controller to input new 4-digit Password.
Date Time
Clock Menu contains different clock settings. Following menu
layout shows the Time Settings.
If the "Time Mode" is set to "Auto" then, "Time Zone" and
"DST" shall be active for editing. If the Mode is "Manual", these
options shall be disabled.
If the "Time Mode" is set to "Manual" then, "Date" and "Time"
shall be active for editing. If the Mode is "Auto", these options
shall be disabled.
Factory Reset
There will be Reset to default when this option be selected.
The system will hint to input "0000"; to set factory Reset
USER'S MANUAL
AV Setting
TV setup provides convenient TV input mode, as shown in
the image below:
Contrast
You can set system contrast via Contrast option.
1. Move the cursor to Contrast option, press RIGHT key to move
the cursor into the Properties list, press LEFT/RIGHT adjust the
contrast as shown below:
2. Contrast can be set from 0 to 24
3. Default:12;
Brightness
The same as contrast
Saturation
The same as contrast
HUE
You can set system HUE via HUE option.
1. Move the cursor to Contrast option, press RIGHT key to move
the cursor into the Properties list, press LEFT/RIGHT adjust the
contrast as shown in image below:
Figure 7.3 HUE
2. HUE can be set from -30 to 30
3. Default:0;
43
Need help?
Do you have a question about the DVBT011 and is the answer not in the manual?
Questions and answers