Logitech G27 Instruction Manual
  1. Manuals
  2. Brands
  3. Logitech Manuals
  4. Video Gaming Accessories
  5. G27 RACING WHEEL
  6. Instruction manual

Logitech G27 Instruction Manual

Hide thumbs Also See for G27:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

Instructions on Logitech G27 support

1. Advantages

Support steering wheels on popular game consoles: PS4 /XBOX ONE/XBOX 360
Real Force Feedback
Vibrations from different road surfaces, rumble strips, bumps and so on
Support clutch
Support manual gear: H-pattern(6+1)shift or Sequential(+/-) shift
Support Automatic Gear
Support RPM/Shift indicator LED
All major key functions are set and ready for use (Keys can also be remapped)
Wheel angle adjustable
No delay or lag
Firmware upgradable
Online support community

2. Usage

Below are some steps you should follow to use G27 with Cross Hair correctly.
1. Make sure there is no controller, keyboard, mouse, joystick or anything else plugged into it.
Then connect Cross Hair to PC, using the USB cable included in the package.
The LOGO should be white.
2. Download "Cross Hair ManagerV1.36.0" or later version,
Extract the zip file and run the Manager. (Windows Only)
Please upgrade the firmware, if the Manager notifies you. When the upgrade is completed, the
Manager will close itself automatically. And you should run it again!
3. Choose your console and add a game in it.
For example, choose PS4 as the console and DriveClub as your game.
These games are tested with G27 steering wheel:
PS4: DriveClub(E),
(Version 2.1)
Need for Speed:
Rivals(L),
Project Cars(E)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G27 and is the answer not in the manual?

Questions and answers

Related Manuals for Logitech G27

Summary of Contents for Logitech G27

  • Page 1 Online support community 2. Usage Below are some steps you should follow to use G27 with Cross Hair correctly. 1. Make sure there is no controller, keyboard, mouse, joystick or anything else plugged into it. Then connect Cross Hair to PC, using the USB cable included in the package.
  • Page 2 4. Save and close the Manager. Detach Cross Hair from PC. 5. Firstly, connect the original controller (USB PORT1) and the G27 (USB PORT2 or 3) to Cross Hair, and then connect Cross Hair to console. A breathing color means it's working well.
  • Page 3 ● Parameters of steering wheel can be changed in game. PS4: Project Cars (E) Kepmapping: ● Parameters of steering wheel can be changed in game. PS4: Need for Speed: Rivals (L) Kepmapping:...
  • Page 4 ● Parameters of steering wheel can be changed according to chapter 4 of this manual. XBOX ONE: Forza 5 (L) Kepmapping: ● Parameters of steering wheel can be changed according to chapter 4 of this manual. XBOX 360: Need for Speed: Hot Pursuit (L) Kepmapping:...
  • Page 5 ● Parameters of steering wheel can be changed according to chapter 4 of this manual. 4. Parameters of Steering Wheel 4.1 Change parameter in Cross Hair Manager These parameters are only for racing games in legacy mode! ● Vibration Strength: A bigger value means stronger vibration on the steering wheel, a smaller value means weaker vibration on the steering wheel.
  • Page 6 Any time in game, just press SHARE+OPTIONS（PS4 platform）keys on your controller to enter CONFIG MODE and the LOGO’s light will be turned off in this mode. Different platform has different keys to use. Game Console Controller Keys to enter/exit CONFIG MODE Dual Shock 4 SHARE+OPTIONS Dual Shock 3...
  • Page 7 Adjusting Vibration Strength (CONFIG MODE) Triangle/Y key is for increasing vibration strength. You will see a flashing yellow light and hear a higher pitch sound once the key is pressed. Cross/A key is for decreasing vibration strength. You will see a flashing red yellow and hear a lower pitch sound once the key is pressed.
  • Page 8 Index of every key of steering wheel and shifter and pedal (This index can be used in Cross Hair Manager for remapping the keys!) 5.2 Change Keymapping in Config Mode Any time in game, just press SHARE+OPTIONS（PS4 platform）keys on your controller to enter CONFIG MODE and the LOGO’s light will be turned off in this mode.
  • Page 9 controller to exit the CONFIG MODE, and end the mapping procedure. All the changes will be saved in the activated configuration during the exiting. If you do not exit the CONFIG MODE, all changes will be lost.

Table of Contents

Save PDF