Confirmation For Use Of Sub Fence (B) - Hitachi C 10FCH2 Technical Data And Service Manual

8-3. Confirmation for Use of Sub Fence (B)

The Models C 10FCH2 and C 10FCE2 are equipped with
sub fence (B). Use sub fence (B) for miter cutting and
right bevel cutting. Sub fence (B) supports the workpiece
widely for stable cutting. In the case of left bevel cutting,
raise sub fence (B) as illustrated in Fig. 11 and turn it
counterclockwise.
WARNING: In the case of left bevel cutting, turn sub fence (B)
counterclockwise. Unless it is turned counterclockwise, the main body or saw blade may
contact the sub fence, resulting in an injury. Be sure to instruct the customers to turn sub
fence (B) counterclockwise in the case of left bevel cutting.
Left bevel cutting
Sub fence
Fence (B)
--- 13 ---
Miter cutting
Turn.
Right bevel cutting
Fig. 11