Table of Contents
Advertisement
USE
When the job is compleded it is necessary to
empty the recovery tank.
A level sensor is located inside the recovery
tank: when the tank is full an automatic stop of
the suction motor will occur and the
corresponding alert light will turn On.
Switch the machine Off.
Open the tank lid.
An emptying hose can be connected if
necessary.
Open the valve of the recovery tank to discharge
the dirty water.
Note: if the machine will not be used for a long
time it is better to empty the solution tank
too.
18
S31EUK4090SY(2)99-01
Advertisement
Table of Contents
