Use Of The Coffee And Spice Ninja Grinder - Ninja BL64X series Owner's Manual

Use of the Coffee and Spice Ninja
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assembly of the stainless steel grinding cup with care as the blades are very sharp.
WARNING: Do not process liquid ingredients. The grinder accessory is not intended for liquid processing.
Do not attempt to chop ice.
CAUTION: Check the grinding cup for presence of foreign objects before using.
ASSEMBLY
Fig. 1 Fig. 2
1
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
2
Make sure that the motor base is plugged in for use.
Lights will not yet illuminate.
3 Add ingredients to the stainless steel grinding cup. Use
the measurement lines on the grinding cup for added
convenience!
NOTE: Do not overfill! to avoid spilling, do not add
ingredients past the "MAX" fill line.
4 Place the lid onto the blade assembly with stainless
steel grinding cup so that the tabs on the cup meet the
entry point on the blade assembly. Twist until the lid is
locked in place. (Fig. 1)
5
Place the grinder onto the motor base, aligning the tabs
on the grinder with the motor base. Turn it clockwise,
until you feel it click into place. (Fig. 2)
15 1-877-646-5288
Grinder
®
USE
Fig. 3 Fig. 4
6 Use only HIGH setting in short intervals until you reach
your desired consistency. (Fig. 3)
7
To remove the grinder, ensure that the motor has
stopped running. Do not remove cover until blade
has completely stopped. Then turn the grinder
anticlockwise (Fig. 4) and pull straight up to remove.
(Fig. 5)
8 Remove the blade assembly with stainless steel
grinding cup by twisting the lid anticlockwise. Be sure
to store the grinder with the lid attached.
10 Make sure that the motor base is unplugged when not
in use.
11 To release the motor base from
the counter or table top, place
your hands underneath both sides
of the motor base and gently
pull the unit up and towards you.
(Fig. 6)
REMOVAL
Fig. 5
Fig. 6