Nokia 5160 Owner's Manual page 28

Dialing
sequence
Access no.
+ phone no.
+ card no.
Access no.
+ card no.
+ phone no.
Prefix
+ phone no.
+ card no.
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6 Enter access number (usually the 1-800 number listed
on the back of the calling card), then press 2. .
7 Enter your card number and/or PIN, then press 2. . Your
phone will display 6DYH FKDQJHV" Press 2. .
8 Press
the card name using your phone's keypad, then press 2. .
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Choosing a calling card to use
To select a calling card to use, press 0HQX 4 1 3, scroll to the
card you want, then press 2SWLRQV . 6HOHFW is highlighted;
press 2. . Enter your security code, then press 2. .
Use for cards that
require you to:
Dial 1-800 access number,
then phone number, then
card number (+ PIN if
required)
Dial 1-800 access number,
then card number (+ PIN if
required), then phone
number
Dial the prefix (any
numbers that must precede
the phone number) and
phone number you want to
dial, then card number (+
PIN if required)
to reach &DUG QDPH , then press 6HOHFW . Enter
20
Cards using
this sequence
MCI, AT&T True
Choice, Sprint
Canada, Unitel
networkMCI,
WorldPhone
MCI
GTE, PacBell,
AT&T, Stentor