TABLE OF CONTENTS INTRODUCTION The PLS HR 1000 is a self-leveling laser Introduction ........Page 1 used for exterior horizontal layout. The rechargeable NIMH battery pack contains Safety Information ......Page 2 micro-controlled charging technology. The HR1000 may also be used with alkaline Batteries ..........Page 3...
The PLS HR 1000 uses rechargeable Laser Safety NIMH batteries. The PLS HR 1000 is a class IIl laser accord- ing to 21CFR1040. Follow the instructions on For on-board chargeable battery, insert the warning labels which are shown in the...
FUNCTIONS KEYPAD OPERATION FUNCTIONS AND INDICATORS Power switch 1) POWER 3) LOW 4)TILT SWITCH BATTERY ON/OFF INDICATOR Press 1 (See keypad chart) The unit 2) POWER is self-leveling and power light is lit. Press LIGHT the key again and the unit will turn off. Rotation Mode After laser has automatically leveled, the laser beam stops blinking.
The PLS HR 1000 should be checked, like ..........Transfer all measuring instruments, before use. Set (Leveling) the PLS HR 1000 on a stable surface. Turn Turn the the laser on and let it level. Mount the PLS instrument HVD 505R Detector at a fixed distance, e.g.
ROTARY SPECIFICATIONS WARRANTY PLS HR 1000: In the event of a claim please contact your PLS dealer or PLS. Attempts at repair or detectable Accuracy: +/- 3/32 inch @100 feet improper treatment will void any warranty claim. 2.4mm @ 30meters...
Need help?
Do you have a question about the HR 1000 and is the answer not in the manual?
Questions and answers