Product Compatibility The Dominator has been designed to adhere to established video standards and is compatible with any product also adhering to accepted video standards. Due to the high number of different manufacturers and variation in quality, it’s impossible to for us to have tested with every product...
Low battery warning: Audio warning if input voltage drops below 6.8V Volume control: each press of button increments volume up or down. Standard earphones can be used with the Dominator. Head tracker: See section under accessories RX power switch: The RX module power is independently controlled via this switch.
Fatshark RC Vision Systems Accessories Head tracker The Fat Shark Dominator head tracker is an advanced 3 axis head tracker that uses gyro sensor for smooth motion detection and accelerometer and compass sensor for error correction. Insertion Setup The head tracker can be configured to output the pan/tilt signals on channels 5 –...
Fatshark RC Vision Systems Futaba Radio setup. Note: Head tracker only works with higher end Futaba radios that support selective student channel mixing. Connect Data cable and turn on radio. Enter TRAINER menu and assign desired head tracking channels to FUNC (must be set on FUNC).
Fatshark RC Vision Systems Operational advice · For best performance, select a channel that has the least amount of interference. While the transmitter is turned OFF, turn on the video headset and look at the screen as you check each channel. Clear channels will have a consistent static background.
Fatshark RC Vision Systems Trouble shooting Observation Possible cause/solution No image, display is - No power supplied. Check power completely dark connections. No image, display is - If using wireless module, turn on RX power glowing dark grey on bottom of headset. - If using AV in cable, check video source.
Need help?
Do you have a question about the DOMINATOR and is the answer not in the manual?
Questions and answers