Replacing Staple Cartridges - Toshiba 4560 Operator's Manual

8. REPLACING STAPLE CARTRIDGES

When the MG-2010,MG-2012 or MG-2015
is used:
The STAPLE symbol
sorter when the stapler of the sorter has run
out of staples and this message appears on
the Message Display panel:
Set staple cartridge
Replace the staple cartridge as described
below.
∗ Refer to page 104 for the STAPLE symbol
position.
When the MG-2010 is used:
1 1 1 1 1
Open the stapling unit cover.
2 2 2 2 2
Remove the empty staple cartridge.
G Lift the cartridge slightly and slide it out.
3 3 3 3 3
Install a new staple cartridge.
G First remove the cap from the new staple
cartridge.
∗
flashes on the
Cap
151