Haiku H Series Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

H Series

INSTALLATION GUIDE

Table of Contents

Need help?

Do you have a question about the H Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Haiku H Series

Page 1 H Series INSTALLATION GUIDE...
Page 2 See your Owner's Manual to discover everything your fan can do. Please contact us with any questions you may have by calling 1-855-MY-HAIKU, or visit us at www.haikuhome.com to learn more about Haiku.
Page 3: Table Of Contents
Installation Guide Topic Page For maintenance and troubleshooting Technical Specifications procedures, see your Owner's Manual. Tools Needed Parts and Hardware Low Profile Mount Standard Mount Universal Mount Prepare the Fan Site Install Your Fan Airfoils Lower Cover Mounting: Low Profile Mounting: Standard Mounting: Universal Test Your Fan...
Page 4 NOTES...
Page 5: Technical Specifications
Box Contents As you remove the fan from its packaging, make sure you are not missing any components required for assembly and operation. If you ordered multiple fans, be sure to keep the components of each fan together! HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE...
Page 6: Low Profile Mount
† Use the two screw caps that match the color of your fan. †† If the EMI filter is included, please install it with your fan. ††† Safety cable not shown REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 7: Standard Mount
If the EMI filter is included, please install it with your fan. †† If installing the fan to a junction box, only one (1) bolt and one (1) nut are needed. • (2) Wiring cover screw ††† Safety cable not shown HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 8: Universal Mount
• (6) Airfoil grommet Wiring hardware • (4) Wire nut † If the EMI filter is included, please install it with your fan. • Cable tie †† Safety cable not shown REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 9: Prepare The Fan Site
If there is not an outlet box at the fan location, install one on a ceiling joist or beam. Disconnect power to the fan location before wiring the fan! HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 11 Make sure the stickers on the airfoils match the stickers on the fan hub. Hardware: a. M5 airfoil screw b. 5 mm lock washer c. Airfoil grommet Remove and recycle the plastic protective cover (d). STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 12: Lower Cover
INSTALL THE LOWER COVER If you purchased the Haiku Light, proceed to the instructions included with the kit. Return to these instructions once the light is installed. REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 13 Align the four slots on the lower cover with the four small round tabs on the fan hub. Press and turn the lower cover clockwise to lock it into place. STEP COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 14 Universal Mount The universal mount can be installed on sloped or flat ceilings ranging from 8.5–18 feet (2.5–5.5 meters) tall. This mount is available for fans with 52-inch, 60-inch, or 84-inch diameters. REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 15 Standard Mount Universal Mount Page 22 Page 32 HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 16: Mounting: Low Profile
MOUNTING: LOW PROFILE INSTALL RUBBER BUMPERS INSTALL MOUNTING PLATE Installation may vary. Refer to the outlet box instructions. REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 17 Slide the rubber bumpers (a) onto the extension tube brackets. Secure the mounting plate (b) to the outlet box with the hardware supplied with the outlet box. Refer to the outlet box instructions. STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 19 While supporting the fan, loop the safety cable around the mounting plate or building structure, and then secure it with the shackle (b). Allow the fan to hang from the safety cable. Hardware: b. Shackle STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 20 Wiring Diagram Wiring Diagram (with EMI Filter) AC Hot/L1 AC Hot/L1 100–240 VAC, 1 Φ, AC Neutral/L2 100–240 VAC, 1 Φ, AC Neutral/L2 50–60 Hz PE/Earth Ground 50–60 Hz PE/Earth Ground BLUE GREEN/YELLOW BROWN BROWN BLUE GREEN/YELLOW REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 21 AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer North America Black White Green or Bare Copper 100–120 V system All other regions Brown Blue Green with Yellow Tracer HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 23 Slide the trim (f) up the extension tube, aligning the tabs on the inside with the slots on the bottom of the wiring cover. Twist clockwise to snap the trim into position. INSTALLATION COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 25 With the fan in the upright position, remove the protective covering from the extension tube. Slide the wiring cover (a) and wiring cover trim (b) over the extension tube, resting them on the fan hub. STEP COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE...
Page 27 Loosely install the mount brace brackets (c) with the provided hardware. The bolt should be inserted in the middle hole. Do not fully tighten the hardware. Hardware: d. M6 x 1 x 25 mm socket cap screw e. M6 x 1 nylock nut STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 29 M8 nut f. 2 mm x 2 mm split pin Loop the safety cable around the mounting bracket or building structure, and then secure it with the shackle (g). Hardware: g. Shackle HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 30 Wiring Diagram Wiring Diagram (with EMI Filter) AC Hot/L1 AC Hot/L1 100–240 VAC, 1 Φ, AC Neutral/L2 100–240 VAC, 1 Φ, AC Neutral/L2 50–60 Hz 50–60 Hz PE/Earth Ground PE/Earth Ground BLUE GREEN/YELLOW BROWN BROWN BLUE GREEN/YELLOW REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 31 AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer North America Black White Green or Bare Copper 100–120 V system All other regions Brown Blue Green with Yellow Tracer HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 33 Slide the wiring cover trim (c) up the extension tube, aligning the tabs on the inside with the slots on the bottom of the wiring cover. Twist clockwise to snap into position. INSTALLATION COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 34: Mounting: Universal
MOUNTING: UNIVERSAL Make sure the extension tube is oriented so that the wiring connector properly mates with the connector from the fan hub. INSTALL MOTOR BRACKETS CONNECT WIRING HARNESS REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 35 Hardware: b. M6 x 28 mm bolt c. M6 x 32 mm bolt d. M6 nut Plug the wiring harness from the extension tube into the wiring harness from the fan. STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 37 Slide the wiring cover (f) down the extension tube, resting it on the fan hub. Make sure no wires are visible between the cover and fan hub. Slide the canopy (g) down the extension tube. STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 39 Insert the wedge (d) into the mounting ball and secure it with the screw (e). Tighten the screw enough to prevent movement between the mounting ball and extension tube, but do not overtighten. STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 41 Secure the mounting bracket (a) to the outlet box with the hardware supplied with the outlet box. If mounting the fan to a sloped ceiling, secure the mounting bracket so that the open side of the bracket is facing up the slope of the ceiling. HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE...
Page 42 AC Hot/L1 AC Hot/L1 100–240 VAC, 100–240 VAC, AC Neutral/L2 AC Neutral/L2 1 Φ, 50–60 Hz 1 Φ, 50–60 Hz PE/Earth Ground PE/Earth Ground GREEN/YELLOW BLUE BLUE BROWN BROWN GREEN/YELLOW +12 VDC, 30 W +12 VDC, 30 W REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 43 AC Hot/L1 AC Neutral/L2 (connected to fan chassis) Brown Blue Green with Yellow Tracer North America Black White Green or Bare Copper 100–120 V system All other regions Brown Blue Green with Yellow Tracer HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ● ●...
Page 45 Connect the wiring harnesses. Secure the green ground wire from the extension tube to the ground wire hanging through the mounting bracket. STEPS COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 47 Raise the canopy to the mounting bracket, lining up the four holes on the canopy with the holes on the bracket. Secure the canopy to the mounting bracket with the painted screws. Make sure no wires or the safety cable are showing. Hardware: b. M4 x 6 mm painted screws INSTALLATION COMPLETED HAIKU ® HOME WWW.HAIKUHOME.COM/SERVICE 1-855-MY-HAIKU ●...
Page 48: Test Your Fan
Turn on the fan and test speed and light brightness. For operating instructions and troubleshooting tips, see your Owner's Manual. If you purchased the Haiku Wall Control, follow the instructions packaged with the wall control. REV. A © 2015 HAIKU HOME. ALL RIGHTS RESERVED.
Page 51 © 2015 Haiku Home The information contained in this document is subject to change without notice. May be protected by one or more patents listed at www.bigasssolutions.com/patents Haiku is a trademark of Delta T Corporation, registered in the U.S. and/or other countries.
Page 52 HKU-INST-95-ENG-01...

Haiku H Series Installation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Haiku H Series

Summary of Contents for Haiku H Series

Table of Contents