Sony MEX-XB100BT Operating Instructions Manual page 29

BLUETOOTH function cannot operate.
-+
Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
No sound is output from the car speakers during
handsfree call.
-+
If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
Siri Eyes Free is not activated.
-+
Perform the handsfree registration for an iPhone
that supports Siri Eyes Free.
-+
Set the Siri function on the iPhone to on.
-+
Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
Application name is mismatched with the actual
application in "SongPal".
-+
Launch the application again from the "SongPal"
application.
While running the "SongPal" application via
BLUETOOTH, the display automatically switches
to [BT AUDIO].
-+
The "SongPal" application or BLUETOOTH
function has failed.
-+
Run the application again.
The "Song Pal" application is automatically
disconnected when the display switches to [IPD].
-+
The "SongPal" application on iPhone/iPod does
not support iPod playback.
-Change the source of the unit to other than
[IPD], then establish the "SongPal" connection
(page 17).
Pandora® connection is not possible.
-+
Shut down the Pandora® application on the
mobile device, and then launch it again.
CD ERROR: The disc cannot be played. The disc will
be ejected automatically.
-+
Clean or insert the disc correctly, or make sure the
disc is not blank or defective.
CD NO MUSIC: There is no playable file. The disc
will be ejected automatically.
-+
Insert a disc containing playable files (page 25).
CD PUSH EJT: The disc could not be ejected
properly.
-+
Press
~
(eject).
HUB NO SUPRT: USB hubs are not supported.
IPD STOP: iPod playback has finished.
-+
Operate your iPod/iPhone to start playback.
OUTPUT ERROR: There may be an internal
malfunction.
-+
Check the connection. If the error message still
remains on in the display, consult your nearest
Sony dealer.
OVERLOAD: The USB device is overloaded.
-+
Disconnect the USB device, then press SRC to
select another source.
-+
The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
-+
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the disc structure.
TEMP CAUTION: The thermal protector is activated.
-+
Reduce the volume.
USB ERROR: The USB device cannot be played.
-+
Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
-+
Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
-+
Connect a USB device containing playable files
(page 25).
USB NO SUPRT: The USB device is not supported.
-+
For details on the compatibility of your USB
device, visit the support site on the back cover.
L L L Lor I I I 1:
The beginning or
the end of the disc has been reached.
_: The character cannot be displayed.
For BLUETOOTH function:
BT BUSY: The BLUETOOTH device is busy.
-+
Wait for a while, then try again.
ERROR: The selected operation could not be
performed.
-+
Wait for a while, then try again.
NO DEV: The BLUETOOTH device is not connected
or recognized.
-+
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
29GB