Change The Backlight Settings; Set The Notification Pop-Up - Kyocera VERVE User Manual

2. Highlight a font size. You can see the current and new font sizes in the display window above the
menu.
3. If you are satisfied with the font size, press SAVE (left softkey).
– or –
From standby mode, press
n
softkey) > Large Font or Normal Font.

Change the Backlight Settings

Select how long the display screen remains backlit after any keypress is made. You can also change
the backlight settings for a Java application that is running in the foreground.
To change the screen backlight setting:
1. From standby mode, press
2. Select Backlight Dim or Backlight Off.
If you select Backlight Dim, select Always Bright, Always Dim, or a preset length of time to
l
elapse before the screen backlight dims.
If you select Backlight Off, select a preset length of time to elapse before the screen, keypad
l
and keyboard backlights turn off. (When you select Always Bright for the Backlight Dim
setting in step 2, the keypad and keyboard backlight will turn off after about one minute.)
Note: Long backlight settings reduce the battery's talk and standby times.
To change the Java application backlight setting:
From standby mode, press
n
Continuous.

Set the Notification Pop-up

This option allows you to enable or disable notification pop-up when you receive a new notification
(except for incoming call and alarm) while an application is running.
1. From standby mode, press
2. Select Enable Pop-up or Disable Pop-up.
Tip: If you select Disable Pop-up, you will see a notification icon only. (The notification pop-up will not
appear while an application is running.)
Settings
to display the main menu, and then press OPTIONS (right
> Settings > Display > Backlight.
> Settings > Display > Backlight > Java Backlight > Default or
> Settings > Display > Notification.
78