Table of Contents
Advertisement
(SK-2323-SDQ shown)
Mullion-Style Keypads
Sealed-Environment Keypads
NOTE: Products with a model number that ends with "Q" or have a round green "Q" sticker represent RoHs compliant products.
Outdoor Stand-Alone
Weatherproof Keypads
Model
Number
SK-2323-SDQ
SK-2323-SPQ
SK-1323-SDQ
SK-1323-SPQ
Manual
2 Relay
Backlit
Outputs
Keys
(SK-1323-SPQ shown)
Proximity
Reader
Advertisement
Table of Contents
Related Manuals for ENFORCER SK-2323-SDQ
Summary of Contents for ENFORCER SK-2323-SDQ
- Page 1 Outdoor Stand-Alone Weatherproof Keypads Manual (SK-2323-SDQ shown) (SK-1323-SPQ shown) Model 2 Relay Backlit Proximity Number Outputs Keys Reader Mullion-Style Keypads SK-2323-SDQ SK-2323-SPQ Sealed-Environment Keypads SK-1323-SDQ SK-1323-SPQ NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.
-
Page 2: Table Of Contents
ENFORCER Outdoor Stand-Alone Keypads Table of Contents Sample Wiring and Application ....6-7 Features ............2 Specifications ..........2 User Control Chart ........8-9 Also Available from SECO-LARM ....2 Programming Instructions ...... 10-13 Dimensions............ 3 Resetting the Keypad ........14 Parts List ............ -
Page 3: Dimensions
ENFORCER Outdoor Stand-Alone Keypads Dimensions SK-2323 Series SK-1323 Series ” (44mm) ” (24mm) 3” (76mm) ” (22mm) ” ” ” 6” ” (90mm) ” (84mm) (90mm) (152mm) (84mm) (120mm) 2” (50mm) ” (30mm) 3/ 16 Parts List 1x Keypad 4x Mounting screws... -
Page 4: Important Notes
ENFORCER Outdoor Stand-Alone Keypads Important Notes IF USING THE KEYPAD WITH A MECHANICALLY OPERATED DOOR OR GATE, MOUNT THE KEYPAD AT LEAST 5’ (15m) FROM THE DOOR OR GATE TO PREVENT USERS FROM BEING CRUSHED OR PINNED. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. -
Page 5: Installation
ENFORCER Outdoor Stand-Alone Keypads Installation Mounting SK-2323 Series screws Mounting bracket Single-gang box mounting point Keypad Single-gang box mounting point Mounting screws Security screw Mounting screws SK-1323 Series Mounting bracket Single-gang box mounting point Keypad Single-gang box mounting point Mounting... -
Page 6: Sample Wiring And Application
ENFORCER Outdoor Stand-Alone Keypads Sample Wiring and Application (SK-1323 series shown. All examples apply to both the SK-1323 and SK-2323 series.) Note: Sample applications are based on VDC power supplies. Connection to Lock Device and Alarm System Arm/Disarm Control Red—12~24 VAC/VDC (+) Pink—Output #1 (COM) - Page 7 ENFORCER Outdoor Stand-Alone Keypads Door Sensing N.C. Dry Contact Brown—Door Sensing Green—Common ground (-) Shunting an Alarm N.C. Zone N.C. Dry Contact Purple—Output #2 (COM) Alarm Control Blue—Output #2 (N.O.) Panel Door-Hold-Open Code Output #1 and Output #2 can be wired together in such a way that electric lock devices remain unlocked as long as Output #2 is activated.
-
Page 9: Programming Instructions
ENFORCER Outdoor Stand-Alone Keypads Programming Instructions 1. Codes are programmed to have 2~6 digits in length. All codes must be the same length. 2. Before inputting any of the following, enter Programming Mode by entering the Master Code twice. The default Master Code is 1234. -
Page 10: Programming Output #1
ENFORCER Outdoor Stand-Alone Keypads D. Program the Master Card (SK-1323-SPQ and SK-2323-SPQ only) In addition to a Master Code, a Master Card can also be programmed. Swiping a Master Card will give direct access to Programming Mode. 1. Enter Programming Mode by entering the Master Code twice. (Default Master Code is 1234) 3. -
Page 11: Deleting/Changing Users And Cards
ENFORCER Outdoor Stand-Alone Keypads Continued from page 11. C. User Card and Code* 1. Enter a user ID number. 2. If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confirmation and the left LED will turn green. -
Page 12: Additional Programming
ENFORCER Outdoor Stand-Alone Keypads Deleting or Changing an Output #1 User Step 1 Step 2 Step 3 Delete existing user by entering: Enter a user ID number. Swipe a new user card.* Enter a new user code. Return to Programming Mode ... -
Page 13: Resetting The Keypad
ENFORCER Outdoor Stand-Alone Keypads Resetting the Keypad NOTE: Resetting the keypad will cause some or all programmed data to be lost. Do not perform either of these steps unless it is absolutely necessary. Deleting All Users Enter: IMPORTANT: Once key entry is made, all user codes and user cards will be deleted and the keypad will return to Programming Mode. -
Page 14: Using The Keypad
ENFORCER Outdoor Stand-Alone Keypads Using the Keypad For programming instructions, see page 10, Programming Instructions. Entering a User Code To activate either Output #1 or Output #2, enter the user code directly into the keypad. Do not enter the user ID number. The user ID number is only used during Programming Mode. -
Page 15: Quick Reference Guide
ENFORCER Outdoor Stand-Alone Keypads Quick Reference Guide Note: For complete programming instructions, please see page 10, Programming Instructions. Operation Function Action Enter an Output #1 user code Directly enter on the keypad Enter an Output #2 user code Directly enter on the keypad...
Need help?
Do you have a question about the SK-2323-SDQ and is the answer not in the manual?
Questions and answers