How To Use; Raid Configuration - StarTech.com PEXSAT32 Instruction Manual

2-port sata 6gbps pci express controller. 2-port esata 6gbps pci express controller

Hide thumbs Also See for PEXSAT32:

Table of Contents

How to Use

To setup a RAID array using the drives connected to the SATA controller card, the

BIOS level configuration menu must be accessed. To access the configuration menu,

during POST (computer startup), the status display for the controller card will display.

When prompted, pressing [CTRL] + [m] will enter the configuration menu. From the

configuration menu, the detected drives can be configured into any of the supported

RAID modes by following the on screen prompts.

Instruction Manual

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the PEXSAT32 and is the answer not in the manual?

Pexesat32