deLuxe
STITCH SYSTEM
™
The deLuxe
™
needle thread: Thread Tension and Thread Portioning.
The deLuxe
™
between needle thread and bobbin thread. It will
automatically use Thread Portioning when possible, to get
the best result.
Thread Portioning automatically and continuously
measures the fabric thickness to portion the correct
amount of thread for the selected stitch. When using
Thread Tension, the tension discs will keep the correct
amount of tension on the needle thread.
deLuxe
™
will change. Use the controls to adjust the balance between
needle thread and bobbin thread, e.g., when using specialty
thread.
Note: When changing the Thread Tension/Portioning by using
the controls, the changes only affect the selected stitch/design. Your
changed settings will be reset to default when selecting another stitch/
design.
Adjust Thread Tension/Thread Portioning
fabric, the Thread Tension/Thread Portioning is too tight.
Reduce the Thread Tension/Thread Portioning.
fabric, the Thread Tension/Thread Portioning is too loose.
Increase the Thread Tension/Thread Portioning.
Tension/Portioning Compensations
too loose, touch the Tension/Portioning Compensations
Note: When changing the Thread Tension/Portioning by using the
Tension/Portioning Compensations in the Machine Settings Menu,
the changes affect all stitches and/or embroidery. Default setting is
Normal. The changed settings are automatically saved when turning
on your machine again.
4 Sewing
Thread Tension control
Thread Portioning control
Needle thread
Bobbin thread
4:9
4:9
Need help?
Do you have a question about the Designer Diamond Royale and is the answer not in the manual?
Questions and answers
Can you turn machine off in the middle of an embroidery and then get back to where it left off
Yes, the Husqvarna Viking Designer Diamond Royale allows you to turn off the machine during embroidery and resume from where it left off using the Smart Save feature.
This answer is automatically generated