Section 4 - Normal Operations; Introduction; Assembly And Disassembly; Pre-Flight Inspection - Evektor EV-97 teamEUROSTAR UK Pilot Operating Handbook

4.1

Introduction

Section 4 provides checklists and detailed procedures for normal operations.
Procedures for optional systems can be found in section 9.
4.2

Assembly and disassembly

For assembly and disassembly procedures refer to the Technical Description,
Operating and Maintenance Manual for the Ultra-light Aeroplane
teamEUROSTAR UK.
4.3

Pre-flight inspection

The pre-flight inspection is vitally important because incomplete or careless
inspection could cause an accident. The following pre-flight inspection procedure is
recommended by the aircraft manufacturer:
Check that the ignition is switched off in the cockpit.
1. Wing
 Wing surfaces' condition, top and bottom.
 Leading edge condition.
 Pitot tube condition.
2. Wing tip
 Surface condition.
 Check of tips attachment.
3. Aileron
 Surface condition, top and bottom.
 Attachment.
 Play.
 Free movement.
4. Flap
 Surface condition, top and bottom.
 Attachment.
 Play
POH/EUR/01
SECTION 4 – NORMAL OPERATIONS
Issue 3
EV-97
Page 21 of 41