Booting The Router - Asus AAM6000EV Quick Setup Instructions Manual

5.1.3. Booting the Router

Now that you have the various software programmes (Terminal/BOOTP/TFTP) setup you are ready to boot the router and auto
load the firmware file.
With HyperTerminal showing, hold down the '*' key (Shift/8) and at the same time press the reset button on the rear of the
router. The following screen should then show on HyperTerminal:
Press E to boot from Ethernet.
The terminal screen should then show boot messages and start to down load the firmware file. At the same time the BOOTP
screen should show the router connecting:
- 14 -