Maintenance; Replacing The Fluore Scent Lamp - Panasonic EY3741 Operating Instructions Manual

IV.MAINTENANCE
Replacing the Fluore scent
Lamp
WARNING
• Do not touch the fl uorescent lamp
or LED during or immedi ately after
use.
Doing so may cause burns.
CAUTION
• Dispose of used fluorescent lamps
intact, without breaking them.
Breaking fluorescent lamps may
result in injury caused by flying
shards of glass.
• Be sure to remove the battery
pack before replacing the lamp.
• Use only the specified type of
fl uorescent lamp. See page 8.
• When attaching the fluorescent
lamp, refl ector, protector, and lamp
cover, fully insert each part until
it is seated securely. Failure to
fully insert all parts may cause the
fluorescent lamp to break when
the lamp cover is attached.
When attaching the refl ector
Fully insert the reflector until it is
seated securely.
Refl ector is not
fully inserted.
01-33_EY3741_EU.indd 7 01-33_EY3741_EU.indd 7
Disassembling the lantern
1) Remove the battery pack. See page
2) Fold down the handle toward the
3) Rotate the lamp cover counter-
4) Remove the protector.
5) Pull the fluorescent lamp up and
6) Pull the reflector up and out of its
Reflector is fully
inserted.
─ 7 ─
5.
back of the lantern.
clockwise and remove.
out of its socket.
slot.
3
5
• To reassemble the lantern, repeat the
above procedure in reverse.
4
2
6
2010/01/21 10:58:32 2010/01/21 10:58:32