Panasonic CX-DH801W Operating Instructions Manual page 24

Table of Contents

Advertisement

Electrical Connection
Connecting the Parking Brake (Side Brake) Connection Lead
Caution: For safety, be sure to ask your nearest professional installer to do this connection.
Parking (side) brake
47
The parking brake (side brake) switch position varies with the car model.
For details on the exact location of the parking brake (side brake) switch in
your car, contact your dealer.
Parking Brake (Side Brake) Connection Lead
(Blue/yellow stripe)
When the parking brake (side brake) lever is
engaged, the unit is grounded by the chassis.
q Attach a Clip Connector i to the end of the parking
brake (side brake) connection lead.
Comes up to this point.
Parking Brake (Side Brake) Connection Lead
(Blue/yellow stripe)
48
CX-DH801W
(Continued)
Foot brake
Parking brake
Clip Connector
i
Car chassis
Battery
+
Brake light
w The Clip Connector i is connected to the power
source side lead of the parking brake (side brake)
lever.
Power source side lead
Connection with DVD/monitor receiver (CQ-VD7001W)
Connection with DVD/monitor receiver with CD/DVD changer control (option, CQ-VD7001W)
Note: Refer to the operating instructions for the connected devices, in addition.
(Side brake)
switch
(BRAKE/VIDEO-CONT/ACC/BATT/DIN/RCA/GND)
Ground Lead
To a clean, bare metallic part of the car chassis
Power Lead
Not used. Do not connect the Power Lead
(ACC) if the control unit is equipped.
Battery Lead
To the car battery, continuous + 12 V DC.
Note: Select [VTR] in [CH INPUT] of the [INPUT/OUTPUT] menu in advance if you would like to watch the display of the
DVD changer with CQ-VD7001W
DVD Changer
CX-DH801W
H
V
H
B
C
V
Fuse 5A
M4X5mmMAX
C
V.A.B
H.A
u
REMOTE-IN
Extension Cord
Remote-In
(RCA) (Black)
Not used.
(Black)
PARKING BRAKE
Parking Brake Lead
(Blue/yellow stripe)
ACC
ACC
(Red)
VIDEO-CNT
Video control Lead (output)
BATTERY 5A
(Green/yellow stripe)
(Yellow)
Not used.
Video Output (Yellow)
RCA Cable
Audio Output (L)
(White)
DIN Connector
Audio Output (R)
(Red)
(R) (Red)
Changer Input Connector
(L) (White)
CH/AUX IN
VTR IN
(Yellow)
Video Input Terminal
(a
page 7).
Note: Never use both Remote-Ins
(one is mini-pin jack, the other is RCA
jack) at the same time. Failure to
observe this may cause misoperation.
RCA Cable (option)
Remote-out
(Black)
Be sure to wire the
parking brake for safety
and preventing accident.
DIN Cable
(Black)
To the changer
connector.
CQ-VD7001W
(option)
CX-DH801W
48
49

Advertisement

Table of Contents
loading

Table of Contents