Code Identification; Reset To Factory Settings - GE 11695 Instruction Manual

Using Your Remote, cont.
setup
list
C D
exit
input
aux
cbl dvd

Code Identification

input
tv cbl dvd aux
setup
exit
menu setup
D
B C
A B C D
tv
cbl dvd
list
menu
A
B C
exit
input
aux

Reset to Factory Settings

list
setup
D
exit
exit
3. Press and release the MUTE button.
4. Press and release the VOL - button.
The red indicator light will blink twice
input
and go off.
aux
1. Press and hold the SETUP button
until the red indicator stays on
setup
(approximately 2 seconds) and then
release the button.
D
2. Press and release the desired device
input
cbl dvd
button (TV, CBL, DVD, AUX) you would
like the code for.
aux
3. Press and release ENTER button.
exit
4. Press and release the #1 button.
Count the number of times the remote
B C
setup
light flashes. This is the number
corresponding to the first digit of the
D
code. Repeat the process by pressing
exit
the #2, #3 and #4 buttons for the
remaining digits.
5. Press and release ENTER button to exit
this mode.
1. Press and hold the SETUP button
until the red indicator stays on
exit
(approximately 2 seconds) and then
release the button.
2. Press and release the MUTE button.
3. Press and release the number #0
button. The red indicator light will flash
twice.
exit
input
aux
setup
D
exit
11