Yamaha ACD1 Service Manual page 68

ACD1
8. Confi rmation of the component writing
• Click on the [Confi rm] button.
• If "V*.** or R*.**" is shown for the component group version, the writing is fi nished successfully. Check that the version is
identical to the program version. [Time required to indicate the completion message: about 2 seconds]
The "V*.** or R*.**" shows the component version, as "V1.10" in the [Example of Writing confi rmation completion screen] in the
fi gure below. If "Error!!" is shown, it indicates that the component data is not written successfully. Write the component data again.
9. After confi rming the component writing
Restarting will not take place automatically after writing component data unlike boot/program updating. Turn off the power
manually and then restart if you want to start in the normal mode.
68
[Example of Writing Confi rmation Completion Screen]