Ah40 - Communication Hub Led Indications - Assa Abloy Aperio AH40 Installation Instructions Manual

AH40 - Communication Hub LED Indications

The Communication Hub has a status LED visible through the front
cover. It supports optical schemes with red, green and yellow. The
indication schemes are described by the figure below:
Online
Aperio Lock
®
Offline
EAC Offline
Aperio Lock and
®
EAC Offline
UHF
Communication
Pairing Active
Note: With the software tool Aperio
and an USB radio dongle, further system installation parameters
can be set.
J201
LINK
ANTENNA
EXT INT
PAIR
J321
- +
8-24V
Green
Green + One
Red Flash
Green + Two
Red Flashes
Green + Three
Red Flashes
Yellow + Off,
Fast Flash
Yellow
Programming Application
®
The "LINK" LED on the
communication Hub
indicates both status of the
Ethernet Link level and if
communication is ongoing.
Note: LED on the Ethernet
connector is not used.
7